Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 32GB DDR4 2933MHz PC4-23400 CL21 1.2V 288pin ECC RDIMM memory upgrade

SKU CH-0W2T-3SQV7

32GB DDR4 2933MHz ECC registered DIMM for Supermicro X11 server motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC registered design detects and corrects data errors automatically
  • 2933 MHz DDR4 speed delivers high bandwidth for server workloads
  • 2 V operation reduces power draw and heat output
  • 2Rx4 dual-rank layout increases memory density per channel
  • Validated for Supermicro X11DPi-NT, X11DPL-i, X11DPS-RE, X11DPT-B and X11DPT-BH motherboards

Server ECC Registered DIMM

This 32GB DDR4 module is built for server and workstation platforms that require ECC registered memory. It targets administrators upgrading Supermicro X11 series motherboards or replacing failed sticks in 24/7 infrastructure.

CL21 2933MHz registered spec

The single specification that decides fit is the registered ECC design at DDR4 2933 with CL21 latency. Unbuffered consumer DIMMs will not work in these slots and mixing registered with unbuffered memory is not supported.

Frees DIMM slots for density

Each stick delivers 32GB in a 2Rx4 layout, letting you reach higher total capacity with fewer populated slots. It runs at 1.2V and is backward compatible with 2133, 2400 and 2666MHz bus speeds, so it drops into existing X11DPi-NT, X11DPL-i, X11DPS-RE, X11DPT-B and X11DPT-BH boards without voltage changes.

Istaknuto

  • ECC registered design detects and corrects data errors automatically
  • 2933 MHz DDR4 speed delivers high bandwidth for server workloads
  • 2 V operation reduces power draw and heat output
  • 2Rx4 dual-rank layout increases memory density per channel
  • Validated for Supermicro X11DPi-NT, X11DPL-i, X11DPS-RE, X11DPT-B and X11DPT-BH motherboards

Specifikacije

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPi-NT
Supermicro Motherboard X11DPL-i
Supermicro Motherboard X11DPS-RE
Supermicro Motherboard X11DPT-B
Supermicro Motherboard X11DPT-BH

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does 2933MHz mean once the module is installed in a server?

The module runs at 2933MHz if the platform supports that speed; otherwise it will down-clock to 2666MHz, 2400MHz or 2133MHz automatically.

How does the registered ECC interface affect usable bandwidth?

The registered buffer adds one cycle of latency but allows the memory controller to drive larger capacities reliably, so the rated PC4-23400 bandwidth is available when the CPU supports it.

What physical slot and clearance does this 288-pin RDIMM need?

It fits a standard 288-pin DDR4 DIMM socket and has no heat spreader, so it clears most CPU coolers and dense server chassis.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.