Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green 288-pin DDR5 RDIMM modules without heat spreaders

OWC

OWC 64GB (2x32GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade

SKU CH-8MPJ-CE7YT

A 64 GB DDR5 ECC registered RDIMM kit with two 32 GB modules at 4800 MT/s CL40 for Dell PowerEdge XE9680 servers

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 64GB (2 x 32GB)

  • 64 GB capacity from two 32 GB modules
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9680 servers

Target Server Platform

This 64GB kit is built for the Dell PowerEdge XE9680. It suits administrators expanding memory in that specific server or workstation. Buyers with standard desktops or consumer motherboards cannot use these registered ECC modules.

Critical Specification

The modules are DDR5 4800 PC5-38400 CL40 2Rx8 ECC Registered RDIMMs at 1.1V. Only systems that require registered ECC DDR5 in a 288-pin form factor will accept them; unbuffered or load-reduced DIMMs will not work.

Installation Notes

Installation follows the server's documented DIMM population rules. The kit includes two 32GB sticks with no heat spreader. Mixing with unbuffered or load-reduced memory causes boot failure, so populate all slots with identical registered modules.

Istaknuto

  • 64 GB capacity from two 32 GB modules
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9680 servers

Specifikacije

BrandOWC
Part Number4R8D52R8064P
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell PowerEdge XE9680

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does the 4800 MT/s rating mean when the modules are installed in a Dell PowerEdge XE9680?

The kit runs at the JEDEC DDR5-4800 standard speed, delivering 38400 MB/s bandwidth per module with CL40 latency once the server initialises the memory at 1.1 V.

How does the 288-pin RDIMM interface limit or enable use in the XE9680?

The 288-pin registered DIMM slot is the only DDR5 form factor the XE9680 accepts; the register buffers address and command signals so the platform can populate all channels with 2Rx8 modules.

What physical clearance does the 288-pin RDIMM need inside the XE9680 chassis?

Each module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the Dell PowerEdge XE9680 memory sockets without requiring extra vertical clearance.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.