Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 64GB (4x16GB) DDR3L 1333 ECC RDIMM Cisco UCS B200 M2 memory upgrade

SKU CH-TXW5-6PR78

64 GB DDR3L 1333 ECC registered kit of four 16 GB modules for Cisco UCS B200 M2 servers

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • ECC registered design protects data integrity in servers
  • 64GB kit with four 16GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V reduces power draw
  • 240-pin RDIMM form factor fits Cisco UCS B200 M2
  • JEDEC and RoHS compliant for reliable operation

64 GB DDR3L ECC RDIMM kit for Cisco UCS B200 M2

This OWC upgrade kit supplies 64 GB of DDR3L 1333 memory as four 16 GB registered DIMMs. Each module runs at 1.35 V with CL9 latency and 2Rx4 organisation. The kit is built to replace Cisco part numbers A02M316GB1L, UCSMR1X162RXA, UCSMR2X162RX and UCSMR2x162RXC in the B200 M2 blade server.

Suited for server and workstation memory expansion

The modules are ECC registered DDR3L DIMMs, so they work only in platforms that require registered error-correcting memory such as the Cisco UCS B200 M2. They will not function in standard desktop computers or in systems that accept only unbuffered or load-reduced ECC memory. Builders who need unbuffered DIMMs or a different voltage should look elsewhere.

Check your blade server memory requirements

Verify that the B200 M2 is configured for DDR3L 1333 registered ECC DIMMs and that all four slots can accept 16 GB 2Rx4 modules at 1.35 V. Confirm the system BIOS supports the total 64 GB capacity and that no mixed-rank or mixed-voltage rules apply. Ensure the existing memory population matches the registered ECC specification before installing this kit.

Istaknuto

  • ECC registered design protects data integrity in servers
  • 64GB kit with four 16GB modules maximises capacity
  • DDR3L 1333 CL9 at 1.35V reduces power draw
  • 240-pin RDIMM form factor fits Cisco UCS B200 M2
  • JEDEC and RoHS compliant for reliable operation

Specifikacije

BrandOWC
Part Number1R3T32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B200 M2

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does my Cisco UCS B200 M2 need 240-pin DDR3L slots to accept this 64GB kit?

Yes, the kit uses 240-pin DDR3L RDIMM modules and is built for the B200 M2 platform.

Can I keep my existing 16GB DDR3L 1333 ECC registered DIMMs and add these four 16GB modules?

Only if every installed module is ECC registered DDR3L 1333 at 1.35V; mixing with unbuffered or load-reduced DIMMs will prevent operation.

How do I confirm the server sees all 64GB at 1333 MHz with ECC active after installation?

Check the BIOS memory summary or Cisco UCS Manager inventory — it should report 64GB total, 1333 MT/s, and ECC enabled.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.