Seagate
Seagate XP1920SE70035 Nytro 5350M 1.92TB enterprise SSD
Enterprise-grade 1.92 TB NVMe SSD delivering up to 7400 MB/s reads and 3300 MB/s writes for data-centre workloads
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5" 15mm
- Capacity1.92TB
- Memory Components3D eTLC
- InterfacePCI-Express 4.0
- 92TB capacity supports dense enterprise workloads
- PCIe 4.0 NVMe interface delivers 7400 MB/s sequential reads
- 1,250,000 IOPS random read performance accelerates database access
- 3500TB endurance rating sustains heavy write cycles
- 5M-hour MTBF ensures long-term data-centre reliability
Enterprise NVMe SSD for data centres
The Seagate Nytro 5350M is a 1.92TB internal solid-state drive built on a PCI-Express 4.0 interface with NVMe protocol. It uses 3D eTLC memory in a 2.5-inch 15mm form factor and delivers up to 7400 MBps sequential read and 3300 MBps sequential write speeds. Random read performance reaches 1,250,000 IOPS while random write hits 90,000 IOPS, with a rated endurance of 3500TB written.
Suited for read-heavy enterprise workloads
This drive targets servers and storage arrays that need high throughput and low latency for read-intensive applications. Its 1 drive writes per day endurance rating and 2,500,000 hour MTBF support continuous operation in 0 to 70°C environments. Buyers who need higher write endurance for mixed or write-heavy workloads should look at drives with a greater DWPD rating.
PCIe 4.0 x4 NVMe interface
The single specification that decides compatibility is the PCI-Express 4.0 NVMe connection. The host system must provide a compatible PCIe slot or backplane supporting this interface and the 2.5-inch 15mm physical dimensions. Power draw reaches 14W active average and 6W idle on the 12V rail, requiring adequate cooling within the chassis.
Istaknuto
- 92TB capacity supports dense enterprise workloads
- PCIe 4.0 NVMe interface delivers 7400 MB/s sequential reads
- 1,250,000 IOPS random read performance accelerates database access
- 3500TB endurance rating sustains heavy write cycles
- 5M-hour MTBF ensures long-term data-centre reliability
Specifikacije
| Brand | Seagate |
|---|---|
| Model | Nytro 5350M |
| Part Number | XP1920SE70035 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" 15mm |
| Capacity | 1.92TB |
| Memory Components | 3D eTLC |
| Interface | PCI-Express 4.0 |
| Protocol | NVMe |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 3300 MBps |
| 4KB Random Read | Up to 1,250,000 IOPS |
| 4KB Random Write | Up to 90,000 IOPS |
| Read Latency | 90µs |
| Write Latency | 12µs |
| Terabytes Written (TBW) | 3500TB |
| MTBF | 2,500,000 hours |
| Power Consumption (Idle) | 11W |
| Power Consumption (Active) | 6W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500Gs |
| Height | 14.9mm |
| Width | 70.1mm |
| Depth | 100.4mm |
| Weight | 205g |
| Težina pošiljke | 0.45 kg |
| Dimenzije pakiranja | 25 × 25 × 25 mm |
Pitanja o ovom artiklu
Does the 2.5" 15mm form factor fit a standard 2.5" U.2 or U.3 hot-swap bay?
The drive uses a 2.5 inch 15mm z-height. Most enterprise U.2 and U.3 bays accept 15mm drives, but verify your specific server tray clearance before installing.
What is the correct PCIe slot generation for the PCIe 4.0 x4 NVMe interface?
Install the drive in a PCIe 4.0 x4 slot or an M.2/U.2 adapter wired for four lanes. A common mistake is using a PCIe 3.0 slot, which halves the available bandwidth.
When should I plan replacement based on the 3500 TBW endurance rating?
The drive is rated for 3500 terabytes written. Monitor SMART percentage-used attribute; replace when it approaches 100 percent or after five years, whichever comes first.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
