Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green circuit boards with black memory chips and gold edge connectors

SK hynix

SK hynix HMT41GU6BFR8A-PB 2x8GB 16GB DDR3 1600 CL11 desktop RAM

SKU CH-MVV6-4NRPM

A 16 GB DDR3 desktop memory kit running at 1600 MHz with CL11 latency and 1.35 V operation

  • 16 GB total capacity from two 8 GB modules
  • Low 1.35 V operation reduces power draw
  • CL11 latency at 1600 MHz data rate
  • 240-pin DDR3 form factor fits desktop DIMM slots
  • Dual-rank 2Rx8 organisation for dense memory configuration

16 GB DDR3 desktop kit

This kit contains two 8 GB DDR3 SDRAM modules for a total capacity of 16 GB. It is built for desktop systems that accept 240 pin DIMMs and run at a data rate of 1600 MHz. The modules operate at 1.35 V with a CAS latency of 11 and a cycle time of 1.5 ns.

Suits standard DDR3 desktops, not ECC platforms

The memory is non ECC and organised as dual rank 2Rx8, matching mainstream consumer motherboards that support PC3L 12800. Systems that require registered or error correcting memory cannot use this kit. Buyers who need ECC functionality should look elsewhere.

PC3L 12800 speed grade decides fit

The decisive specification is the PC3L 12800 rating which corresponds to 1600 MHz at CL11. If the motherboard or processor only supports lower DDR3 speeds this kit will still run but at the slower supported rate. Verify the platform accepts 1.35 V DDR3 before purchase.

Istaknuto

  • 16 GB total capacity from two 8 GB modules
  • Low 1.35 V operation reduces power draw
  • CL11 latency at 1600 MHz data rate
  • 240-pin DDR3 form factor fits desktop DIMM slots
  • Dual-rank 2Rx8 organisation for dense memory configuration

Specifikacije

BrandSK hynix

Pitanja o ovom artiklu

How can I verify the kit is running at the rated 1600 MT/s and CL11 timings after installation?

Enter the BIOS or use a tool such as CPU-Z and confirm the memory frequency reads 800 MHz (DDR 1600) with CAS latency 11.

What exactly ships in the package and is anything else required to use it?

The package contains two 8 GB 240-pin DDR3 UDIMMs for a total of 16 GB; no extra components are needed for a standard desktop DIMM slot.

Should I choose this 2×8 GB 1600 CL11 kit or a different capacity or speed grade?

Select this kit when you need 16 GB total at 1600 MT/s CL11; choose a different kit only if your build requires another capacity or data rate.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.