Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Three white 120mm case fans with dual ARGB rings and a wired controller

SXDOOL

SXDOOL MasterFan MF120 Halo White Edition 120mm 3 Pack Addressable RGB case fan

SKU CH-G90M-MRKBE

Three 120 mm case fans with 24 addressable RGB LEDs each, hybrid static-pressure blades, rifle bearings and a wired ARGB controller for PWM speeds from 650 to 1800 RPM

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeRifle Bearing
  • RPM650 - 1800 RPM +/- 10%
  • Air Flow47.2 CFM +/- 10%
  • Three fans with 24 individually controlled ARGB LEDs for vivid lighting
  • Hybrid static-pressure blade design handles radiator and mesh-chassis resistance
  • Rifle bearing and absorbing rubber pads keep noise between 6 and 30 dBA
  • PWM control adjusts speed from 650 to 1800 RPM for quiet or max airflow
  • Wired ARGB controller lets you change colours with a button press

Three-fan kit with addressable RGB

This pack contains three 120 mm case fans finished in white. Each unit carries 24 individually controlled ARGB LEDs arranged in a dual-ring layout. A wired ARGB controller is included so colours can be changed with a button press. The fans use a 4-pin PWM connector for automatic speed control.

Straightforward mounting with included hardware

Twelve screws and two ARGB holsters ship in the box for quick installation. The 4-pin PWM splitter connects all three fans to a single motherboard header. Rubber pads on the frame corners absorb vibration. Cable routing for the ARGB and power leads should be planned before securing the fans.

Builders wanting synchronised lighting

The hybrid static-pressure blades suit radiators, mesh panels or general case ventilation. Noise ranges from 6 to 30 dBA across the 650 to 1800 RPM range. Buyers who need higher static pressure for dense radiators or prefer magnetic-levitation bearings should look at other models.

Istaknuto

  • Three fans with 24 individually controlled ARGB LEDs for vivid lighting
  • Hybrid static-pressure blade design handles radiator and mesh-chassis resistance
  • Rifle bearing and absorbing rubber pads keep noise between 6 and 30 dBA
  • PWM control adjusts speed from 650 to 1800 RPM for quiet or max airflow
  • Wired ARGB controller lets you change colours with a button press

Specifikacije

Fan Counts3 Fans
TypeCase Fan
Fan Thickness25mm
Bearing TypeRifle Bearing
RPM650 - 1800 RPM +/- 10%
Air Flow47.2 CFM +/- 10%
Noise Level6 -30 dBA
Power Connector4-Pin PWM
ColorWhite
LEDAddressable RGB

Pitanja o ovom artiklu

How can I confirm the three fans are running at the correct speeds after installation?

Connect the 4-pin PWM connectors to the motherboard and monitor RPM in BIOS or fan-control software; the fans should report between 650 and 1800 RPM with a tolerance of ten percent.

What accessories are included in the package and what must I provide myself?

The box contains three 120 mm fans, twelve mounting screws, two ARGB holsters, a wired ARGB controller, an ARGB power cable, a fan power splitter and a manual; you only need a motherboard with a 4-pin PWM header and a 5 V addressable RGB header.

Which version should I choose if I want the white finish with the wired ARGB controller?

Select the 3 Pack Addressable RGB w/ Controller option (model MFL-B2DW-183PA-R1); it includes three white fans and the wired controller in a single package.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.