Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two grey thermal pads 120 by 100 millimetres 1.0 millimetre thick

Thermal Grizzly

Thermal Grizzly Minus Pad HC 120x100x1.0mm 2-Pack

SKU CH-BS8T-95Z0J

High-compression thermal pad kit for SSDs and GPUs, electrically non-conductive and adaptable to varying component heights

  • FeaturesThe thermal pads of the Minus Pad High Compression series of
  • High compressibility bridges varying component heights
  • Excellent thermal conductivity maintained under heavy compression
  • Electrically non-conductive for safe GPU and SSD use
  • Easy handling simplifies graphics card water-cooling conversions
  • Versatile pad suits VRAM, voltage regulators and other contacts

High-Compression Thermal Pad 120x100mm

The Thermal Grizzly Minus Pad HC is a high-compressibility thermal interface material supplied as two 120x100mm sheets at 1.0mm thickness. It targets builders converting graphics cards to water cooling or replacing dried-out factory pads on GPUs and SSDs where component heights vary. Electrically non-conductive properties prevent short circuits if the pad bridges adjacent circuitry.

Simple Cut-and-Place Installation

Pads are trimmed with scissors to fit VRAM, voltage regulators and GPU dies in a single step, and their soft structure conforms to uneven surfaces without requiring precise thickness matching. Over-compression beyond the material’s design range can reduce long-term resilience, so installers should avoid excessive mounting pressure that permanently deforms the silicone matrix.

Bridges Mixed Stack Heights up to 1.0mm

One pad thickness simultaneously contacts components sitting at different levels, such as memory chips and MOSFETs, maintaining thermal transfer across the whole block. The 1.0mm starting thickness covers typical factory gaps; stacks exceeding this height or applications demanding thinner profiles will need a different pad specification.

Istaknuto

  • High compressibility bridges varying component heights
  • Excellent thermal conductivity maintained under heavy compression
  • Electrically non-conductive for safe GPU and SSD use
  • Easy handling simplifies graphics card water-cooling conversions
  • Versatile pad suits VRAM, voltage regulators and other contacts

Specifikacije

BrandThermal Grizzly
ModelTG-MP-HC-120-100-10-2
Part NumberTG-MP-HC-120-100-10-2
FeaturesThe thermal pads of the Minus Pad High Compression series offer extremely high compressibility combined with excellent thermal conductivity. They are especially practical when converting a graphics card to a water cooler, as a single pad thickness can be used across various contact points.

Pitanja o ovom artiklu

How do I know the Minus Pad HC is working after installing it on my SSD or GPU?

You will see lower component temperatures under load because the 1.0 mm pad compresses to fill gaps and maintains thermal conductivity even under heavy pressure.

What comes in the box and what else do I need to buy?

The pack contains two 120x100 mm pads; no extra tools or compounds are required for installation.

Which thickness should I choose for my graphics card conversion?

Choose the 1.0 mm version when your measured gap is at or slightly below that thickness, as the pad compresses to match varying heights.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.