Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
White mid-tower ATX case with tempered glass side panel and pre-installed ARGB fans

Thermaltake

Thermaltake S380 TG ARGB CA-11K-00M6WN-00 PC case Snow

SKU CH-KA8B-F2JDG MPN CA-11K-00M6WN-00

ATX mid-tower with tempered-glass side panel, pre-installed 360 mm and 120 mm ARGB PWM fans, and support for hidden-connector motherboards

  • TypeATX Mid Tower
  • ColorSnow
  • Case MaterialSPCC
  • Motherboard CompatibilityATX/mATX/mITX
  • Side Panel4mm Tempered Glass x 1
  • Internal 3.5" Drive Bays2
  • Pre-installed SF360 reverse fan delivers 173.96 CFM for strong bottom intake airflow
  • Rear SF120 fan provides 58.7 CFM exhaust to complete the cooling loop
  • Supports 360 mm radiators at top and front for high-capacity liquid cooling
  • Fits 400 mm graphics cards and 180 mm CPU coolers in a mid-tower footprint
  • Hidden-connector motherboard cut-outs keep cable routing clean for ATX and mATX builds

Mid-Tower ATX Chassis for Hidden-Connector Builds

The Thermaltake S380 TG ARGB Snow is an ATX mid-tower case designed for standard and hidden-connector motherboards from ASUS BTF, MSI PROJECT ZERO and GIGABYTE PROJECT STEALTH. It includes a 4 mm tempered glass side panel, two 3.5 inch and two 2.5 inch drive bays, and seven expansion slots. A GPU holder is supplied to prevent graphics card sag.

Sustained Airflow With Pre-Installed PWM Fans

A 360 mm SF360 ARGB PWM reverse fan on the PSU cover and a 120 mm SF120 ARGB PWM fan at the rear come pre-installed. The SF360 runs at 500 to 1800 rpm and delivers up to 173.96 CFM combined, while the SF120 provides up to 58.7 CFM. Top and front mounts each support a 360 mm, 280 mm or 240 mm radiator for liquid cooling under continuous load.

Tool-Free Access With Vibration-Damped Fan Tray

The removable front fan tray uses rubber vibration dampeners for quick installation and reduced noise. Adjustable main cable covers adapt to different motherboard layouts, and extra cutouts route hidden-connector cables cleanly. Builders must verify their CPU cooler stays within 180 mm and power supply within 200 mm depth to avoid fitment issues.

Istaknuto

  • Pre-installed SF360 reverse fan delivers 173.96 CFM for strong bottom intake airflow
  • Rear SF120 fan provides 58.7 CFM exhaust to complete the cooling loop
  • Supports 360 mm radiators at top and front for high-capacity liquid cooling
  • Fits 400 mm graphics cards and 180 mm CPU coolers in a mid-tower footprint
  • Hidden-connector motherboard cut-outs keep cable routing clean for ATX and mATX builds

Specifikacije

BrandThermaltake
SeriesS Series
ModelCA-11K-00M6WN-00
TypeATX Mid Tower
ColorSnow
Case MaterialSPCC
Motherboard CompatibilityATX/mATX/mITX
Side Panel4mm Tempered Glass x 1
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsTop: 3 x 120mm, 2 x 120mm, 1 x 120mm 2 x 140mm, 1 x 140mm
Front: 3 x 120mm, 2 x 120mm, 1 x 120mm 3 x 140 mm, 2 x 140mm, 1 x 140mm
Rear: 1 x 120mm 1 x 140mm
Power Cover: 3 x 120mm, 2 x 120mm, 1 x 120mm
Radiator OptionsTop Side (AIO): 1 x 360mm, 1 x 240mm, 1 x 120mm 1 x 280mm, 1 x 140mm
Front Side (AIO): 1 x 360mm, 1 x 240mm, 1 x 120mm 1 x 280mm, 1 x 140mm
Rear Side (AIO): 1 x 120mm
Max GPU Length400 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm
Dimensions536 x 238 x 485mm
(21.1x 9.37 x 19.1inch)
Težina pošiljke11.50 kg
Dimenzije pakiranja591 × 552 × 311 mm

Pitanja o ovom artiklu

Will my graphics card fit with a 360 mm radiator mounted at the front?

The case allows a 400 mm GPU and a 360 mm front radiator together, so most combinations will fit, but check your card length against the 400 mm limit.

Can I use this case with an ASUS BTF motherboard and hide all cables?

Yes, the chassis has cutouts and an adjustable cable cover designed for hidden-connector boards such as ASUS BTF, MSI PROJECT ZERO and GIGABYTE PROJECT STEALTH.

What fans come pre-installed and where are they mounted?

A 360 mm SF360 ARGB PWM reverse fan is fitted on the PSU cover and a 120 mm SF120 ARGB PWM fan at the rear exhaust.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.