Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Slim rectangular AT power supply, matte metal finish, push-button switch on front, fan vent on rear, 150W label

TOPOWER

TOPOWER TOP-150A1 150W AT power supply

SKU CH-BD2Z-CB2V9 MPN TOP-150A1

A 150W AT power supply with P8/P9 connectors, two Molex and two FDD outputs, and a push-button switch in a slim 170 x 80 x 62 mm case

  • TypeAT
  • Maximum Power150 W
  • Fans1
  • Main ConnectorP8/P9 6PIN AT
  • +12V RailsSingle
  • ModularNo
  • 150 W output powers legacy AT systems
  • Slim 170 x 80 x 62 mm chassis fits compact cases
  • P8/P9 6-pin AT connector ensures motherboard compatibility
  • Dual voltage 115/230 V input suits global mains supplies
  • Over-voltage and overload protection safeguards connected components

Slim AT power supply for legacy builds

The TOPOWER TOP-150A1 is a 150 W AT form-factor unit designed for vintage PCs and industrial boards that still use the P8/P9 6-pin motherboard connector. Its slim 170 x 80 x 62 mm chassis fits tight enclosures where standard ATX units will not mount.

Replaces ageing original AT units

Swap this in when an old 150 W supply has failed or drifted out of regulation on the +5 V 15 A and +12 V 6 A rails. The jump is worth it if the original lacks over-voltage and overload protection, because this model includes both safeguards for the 115 / 230 V input range.

Straightforward drop-in installation

The fixed cable loom provides two Molex 4-pin and two FDD 4-pin leads plus the AT motherboard connector, so no modular cables need routing. A push-button mains switch is integrated on the unit. The only common snag is the single 80 mm fan orientation; verify airflow direction matches the case venting before securing the four mounting screws.

Istaknuto

  • 150 W output powers legacy AT systems
  • Slim 170 x 80 x 62 mm chassis fits compact cases
  • P8/P9 6-pin AT connector ensures motherboard compatibility
  • Dual voltage 115/230 V input suits global mains supplies
  • Over-voltage and overload protection safeguards connected components

Specifikacije

BrandTOPOWER
SeriesA1
ModelTOP-150A1
TypeAT
Maximum Power150 W
Fans1
Main ConnectorP8/P9 6PIN AT
+12V RailsSingle
ModularNo
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage115 / 230 V
Input Frequency Range50/60 Hz
Output150W
Power Rating150W
Dimensions170 x 80 x 62 MM
Weight3 LBS
+5V Max. Current15A
+12V1 Max. Current6A
-12V Max. Current0.5A
Floppy Connector2
Peripheral Connector2
Fans Total Quantity1
Rear Fans Size60mm

Pitanja o ovom artiklu

Will the 170 mm length fit inside my slim AT case?

The unit measures 170 x 80 x 62 mm, so verify your chassis clearance against those dimensions before ordering.

Does the +12 V rail deliver enough current for a vintage hard drive?

The single +12 V rail is rated at 6 A, which matches many period-correct drives.

Can I connect both a hard drive and a floppy drive at the same time?

Yes, the supply provides two Molex 4-pin and two FDD 4-pin connectors for simultaneous use.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.