Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black PCIe x1 card with one Mini SAS SFF-8087 port

weastlinks

weastlinks PCIe x1 to Mini SAS SFF-8087 4-port SATA 3.0 6Gbps adapter

SKU CH-QRTF-35E6X

Adds four SATA 3.0 ports at 6.0 Gbps through a PCIe x1 2.0 slot using a Mini SAS SFF-8087 connector

  • Changer TypeOther
  • Add four SATA 3.0 drives through one PCIe x1 2.0 slot
  • 0 Gbps transfer rate per port for SSD and HDD
  • Marvell 88SE9215 controller handles four SATA connections
  • Mini SAS SFF-8087 connector breaks out to four SATA cables
  • Works with Windows 10 and Linux Ubuntu systems

PCIe x1 to Mini SAS SFF-8087 Adapter

This adapter adds four SATA 3.0 ports to a system through a single PCI Express x1 2.0 slot. It uses a Marvell 88SE9215 controller to provide 6.0 Gbps links for hard drives or solid-state drives. The card is compatible with Windows 10 and Linux Ubuntu. A 70 cm SFF-8087 to four SATA cable is available in the pack.

Builders expanding SATA capacity on a spare x1 slot

The board suits desktop owners who need more SATA connections for storage arrays or Chia plotting. It does not support SAS hard disk drives, so buyers with SAS media should look elsewhere. Systems without a free PCIe x1 2.0 lane cannot use this card. The single-lane host limits total throughput to the PCIe 2.0 x1 ceiling.

Mini SAS SFF-8087 4-port SATA 3.0 6.0 Gbps interface

The SFF-8087 connector breaks out to four SATA 3.0 ports running at 6.0 Gbps each. This single specification decides whether the adapter matches the drive cables and backplane in your build.

Istaknuto

  • Add four SATA 3.0 drives through one PCIe x1 2.0 slot
  • 0 Gbps transfer rate per port for SSD and HDD
  • Marvell 88SE9215 controller handles four SATA connections
  • Mini SAS SFF-8087 connector breaks out to four SATA cables
  • Works with Windows 10 and Linux Ubuntu systems

Specifikacije

Changer TypeOther

Pitanja o ovom artiklu

How can I verify the adapter is running at 6.0 Gbps after installation?

Check the link speed in your operating system storage utility or BIOS; it should report 6.0 Gbps per port when SATA 3.0 drives are connected.

Which cables and drives are included versus what I must buy separately?

The box contains the PCIe x1 card and optionally a 70 cm SAS to 4× SATA 3.0 cable; you must supply up to four SATA HDDs or SSDs yourself.

Should I choose the card-only option or the bundle with the 70 cm cable?

Pick the bundle if you need the Mini SAS SFF-8087 breakout cable to connect four SATA drives; choose the card alone if you already have a compatible cable.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.