Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

Yaokong

Yaokong motherboard accessory for ASUS P9X79-E WS LGA 2011

SKU CH-H40B-GCDGR

Replacement accessory kit for ASUS X79 workstation board with LGA 2011 socket and SSI CEB layout

  • Designed for ASUS P9X79-E WS LGA 2011 Intel X79 motherboard
  • SSI CEB form factor fits 30.48cm x 26.67cm workstation chassis
  • 8 memory slots support ECC and non-ECC RAM configurations
  • 7 PCI Express x16/x8 slots enable multi-GPU expansion
  • 10 SATA cables plus SLI bridges included for storage and graphics setup

Accessory for ASUS P9X79-E WS LGA 2011

This Yaokong accessory is designed for the ASUS P9X79-E WS motherboard using the Intel X79 chipset and LGA 2011 socket. It suits builders working on an SSI CEB form factor platform with 8 memory slots and multiple expansion slots. The item is supplied new.

Compatibility check before ordering

Verify that your system uses the ASUS P9X79-E WS board with an Intel X79 chipset and LGA 2011 socket. Confirm the SSI CEB form factor fits your chassis and that your power supply provides the required 24-pin and 8-pin ATX12V connectors. Ensure your CPU cooler clearance matches the board layout.

Thermals noise and power draw

The accessory itself adds no active cooling or power draw; thermal and acoustic performance depends on the host motherboard and installed components. The board supports SATA 300 and 600 interfaces with multiple RAID modes across Intel, Marvell 88SE9230 and ASMedia ASM1061 controllers. Power delivery uses standard 24-pin and 8-pin connectors.

Istaknuto

  • Designed for ASUS P9X79-E WS LGA 2011 Intel X79 motherboard
  • SSI CEB form factor fits 30.48cm x 26.67cm workstation chassis
  • 8 memory slots support ECC and non-ECC RAM configurations
  • 7 PCI Express x16/x8 slots enable multi-GPU expansion
  • 10 SATA cables plus SLI bridges included for storage and graphics setup

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

Does the package include every cable and bridge I need for a multi-GPU build?

The box supplies ten Serial ATA cables, one three-way SLI bridge, one four-way SLI bridge and one additional SLI bridge, covering typical multi-GPU cabling.

Which SATA controller should I use for the fastest SSD performance?

Connect high-speed SSDs to the two native Intel SATA-600 ports or the four Marvell 88SE9230 SATA-600 ports; the ASMedia ASM1061 ports are external.

What does the eight-slot memory layout mean for total RAM capacity?

With eight DIMM slots you can populate up to eight modules, allowing very high total capacity when using large-capacity registered or unbuffered DIMMs.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.