Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Small black 60 by 15 millimetre case fan with three wires

Zyvpee

Zyvpee 2406KL-05W-B59 T18 60x15mm 3-pin case fan

SKU CH-NSKX-4QB46

A 60 mm ball-bearing case fan running at up to 1600 RPM on 24 V DC power with a three-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • 60 mm compact frame fits tight case layouts
  • 15 mm slim profile clears low-clearance components
  • Ball bearing design extends operational lifespan
  • DC 24 V 0.13 A input keeps power draw low
  • Three-pin connector enables motherboard speed monitoring

Zyvpee 2406KL-05W-B59 T18 60x15mm 3-pin case fan

The Zyvpee 2406KL-05W-B59 T18 is a compact 60 mm by 15 mm case fan designed for equipment cooling. It operates on a 24 V DC supply drawing 0.13 A and connects via a standard three-pin header. The ball bearing supports speeds up to 1600 RPM in a non-LED black frame.

Suited for inverter cooling

This fan fits builds that specifically require a 24 V 6015 form factor with a three-pin connection. It is not suitable for standard PC motherboards that only provide 5 V or other voltage headers. Buyers needing a different voltage, a larger frame, a four-pin PWM connector, or integrated lighting should look at other models.

24 V DC 0.13 A power requirement

The single specification that decides compatibility is the 24 V DC 0.13 A electrical rating. Verify that your device or controller supplies exactly this voltage and can deliver the stated current before purchasing. The three-pin connector provides tachometer feedback but does not support PWM control.

Istaknuto

  • 60 mm compact frame fits tight case layouts
  • 15 mm slim profile clears low-clearance components
  • Ball bearing design extends operational lifespan
  • DC 24 V 0.13 A input keeps power draw low
  • Three-pin connector enables motherboard speed monitoring

Specifikacije

BrandZyvpee
Series2406KL-05W-B59
Model2406KL-05W-B59
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions60*15MM

Pitanja o ovom artiklu

How do I mount the 60 mm by 15 mm frame and connect the 3-pin plug to a 24 V DC header?

Align the fan with the case’s 60 mm mounting points, secure it with four screws through the corner holes, then attach the 3-pin connector to a 24 V DC fan header on the motherboard or controller.

What maintenance will the ball bearing need over time?

The ball bearing is sealed and requires no lubrication; if noise or vibration appears after extended use, replace the entire fan unit.

At what point does the 1600 RPM limit restrict sustained cooling performance?

The fan tops out below 1600 RPM, so under continuous high-load conditions the airflow ceiling is reached first, limiting further heat dissipation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.