BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
16 GB DDR3 1866 MHz ECC registered server memory module with CL13 latency and 1.5 V operation
This 16GB DDR3 1866MHz ECC registered DIMM replaces Micron MT36JDZS2G72PZ-1G9 and related part numbers in server and workstation systems. It delivers 16GB of error-correcting memory at PC3-14900 speed with CL13 latency. The module uses major-brand chips on a 240-pin form factor. Buyers who need non-ECC or unbuffered memory for desktop platforms cannot use this part.
Installation follows standard DIMM procedures: power down the system, open the chassis, align the 240-pin keying with the motherboard slot, and press firmly until the retention clips engage. Registered ECC modules require a motherboard and chipset that explicitly support registered memory and ECC functionality. Common issues arise when the system only accepts unbuffered DIMMs or disables ECC in the BIOS, causing the module to be unrecognised or to operate without error correction. Verify the platform documentation before purchase.
The single specification that determines fit is the 2Rx4 registered ECC organisation on a DDR3 240-pin interface at 1.5V. Only systems qualified for DDR3 registered ECC DIMMs with this rank configuration will initialise the module correctly. Mismatched rank, voltage, or buffering type will prevent boot or disable ECC features.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Check the BIOS or a system utility such as CPU-Z; it should report 1866 MHz speed, CL13 latency, 1.50 V voltage, ECC enabled and registered DIMM type.
The box contains one 240-pin DDR3 1866 MHz ECC RDIMM 2Rx4 module; no cables, brackets or additional hardware are included.
Choose the single 16 GB 2Rx4 module listed; it is the direct equivalent for that Micron part number.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?