Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR3 1866MHz ECC RDIMM 2Rx4 for Micron MT36JDZS2G72PZ-1G9 Server RAM

SKU CH-SQS3-VWRVX

16 GB DDR3 1866 MHz ECC registered server memory module with CL13 latency and 1.5 V operation

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3 1866 MHz capacity handles heavy server workloads
  • ECC registered design with 2Rx4 rank detects and corrects memory errors
  • CL13 latency at 1.5 V delivers responsive data access
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT36JDZS2G72PZ-1G9 and related part numbers

Server DDR3 ECC RDIMM replacement

This 16GB DDR3 1866MHz ECC registered DIMM replaces Micron MT36JDZS2G72PZ-1G9 and related part numbers in server and workstation systems. It delivers 16GB of error-correcting memory at PC3-14900 speed with CL13 latency. The module uses major-brand chips on a 240-pin form factor. Buyers who need non-ECC or unbuffered memory for desktop platforms cannot use this part.

Installation and compatibility checks

Installation follows standard DIMM procedures: power down the system, open the chassis, align the 240-pin keying with the motherboard slot, and press firmly until the retention clips engage. Registered ECC modules require a motherboard and chipset that explicitly support registered memory and ECC functionality. Common issues arise when the system only accepts unbuffered DIMMs or disables ECC in the BIOS, causing the module to be unrecognised or to operate without error correction. Verify the platform documentation before purchase.

Critical specification: registered ECC

The single specification that determines fit is the 2Rx4 registered ECC organisation on a DDR3 240-pin interface at 1.5V. Only systems qualified for DDR3 registered ECC DIMMs with this rank configuration will initialise the module correctly. Mismatched rank, voltage, or buffering type will prevent boot or disable ECC features.

Helstu kostir

  • 16 GB DDR3 1866 MHz capacity handles heavy server workloads
  • ECC registered design with 2Rx4 rank detects and corrects memory errors
  • CL13 latency at 1.5 V delivers responsive data access
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Compatible replacement for Micron MT36JDZS2G72PZ-1G9 and related part numbers

Tæknilýsing

BrandA-Tech
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

How can I confirm the module is running at DDR3 1866 MHz with ECC registered operation after installation?

Check the BIOS or a system utility such as CPU-Z; it should report 1866 MHz speed, CL13 latency, 1.50 V voltage, ECC enabled and registered DIMM type.

What ships with the 16 GB module and what must I source separately?

The box contains one 240-pin DDR3 1866 MHz ECC RDIMM 2Rx4 module; no cables, brackets or additional hardware are included.

Which capacity and rank version matches the Micron MT36JDZS2G72PZ-1G9 part number?

Choose the single 16 GB 2Rx4 module listed; it is the direct equivalent for that Micron part number.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.