Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 240-pin DDR3 RDIMM with black chips and a white label

A-Tech

A-Tech 16GB DDR3 1866MHz ECC Registered RDIMM 2Rx4 Supermicro Certified

SKU CH-94E6-J85Q1

16GB DDR3 1866MHz ECC registered RDIMM, Supermicro certified for reliable server upgrades

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

16GB DDR3 ECC RDIMM for servers

This 16GB DDR3 1866MHz ECC Registered DIMM is built for Supermicro platforms that require 2Rx4 registered memory. It suits administrators expanding capacity in compatible rackmount or tower servers running memory-intensive workloads.

Upgrade from lower-capacity or non-ECC DDR3 modules

Replacing smaller RDIMMs with this 16GB module increases total system memory while maintaining registered signal integrity and ECC protection. The jump is worth it when your current configuration hits capacity limits or lacks error correction for critical data.

Verify DDR3 RDIMM slot availability and 1.5V support

Confirm your motherboard accepts 240-pin DDR3 Registered DIMMs at 1.5V and supports 2Rx4 organisation. Check the vendor qualified-vendor list for the exact part number before ordering.

Erősségek

  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

Műszaki adatok

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-HL03-ER18
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR316L-HL03-ER18 (Hynix)

Kérdések a termékről

Does the 240-pin RDIMM fit a standard DDR3 server DIMM slot?

Yes, the 240-pin RDIMM form factor is the standard DDR3 registered DIMM layout and will seat in any compatible DDR3 server memory slot.

Is there a specific order for populating the 2Rx4 registered modules on a Supermicro board?

Supermicro boards typically require registered DIMMs to be installed starting with the slot furthest from the CPU; check the motherboard manual for the exact population sequence.

Will the 1.5V DDR3 modules need any firmware updates or battery changes over time?

No firmware or battery maintenance is required for the memory modules themselves; they operate at the standard 1.5V DDR3 voltage for their service life.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.