Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 240-pin DDR3 RDIMM with black chips and a white label

A-Tech

A-Tech 16GB DDR3 1866MHz ECC Registered RDIMM 2Rx4 Supermicro Certified

SKU CH-94E6-J85Q1

16GB DDR3 1866MHz ECC registered RDIMM, Supermicro certified for reliable server upgrades

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

16GB DDR3 ECC RDIMM for servers

This 16GB DDR3 1866MHz ECC Registered DIMM is built for Supermicro platforms that require 2Rx4 registered memory. It suits administrators expanding capacity in compatible rackmount or tower servers running memory-intensive workloads.

Upgrade from lower-capacity or non-ECC DDR3 modules

Replacing smaller RDIMMs with this 16GB module increases total system memory while maintaining registered signal integrity and ECC protection. The jump is worth it when your current configuration hits capacity limits or lacks error correction for critical data.

Verify DDR3 RDIMM slot availability and 1.5V support

Confirm your motherboard accepts 240-pin DDR3 Registered DIMMs at 1.5V and supports 2Rx4 organisation. Check the vendor qualified-vendor list for the exact part number before ordering.

Punti di forza

  • Supermicro-certified RDIMM ensures validated compatibility with qualified platforms
  • ECC registered design detects and corrects single-bit errors for data integrity
  • 16 GB dual-rank module expands server capacity for heavier workloads
  • DDR3 1866 MT/s at CL13 delivers responsive throughput for supported systems
  • Standard 1.5 V operation matches DDR3 JEDEC specification for broad platform support

Caratteristiche tecniche

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR316L-HL03-ER18
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR316L-HL03-ER18 (Hynix)

Domande su questo articolo

Does the 240-pin RDIMM fit a standard DDR3 server DIMM slot?

Yes, the 240-pin RDIMM form factor is the standard DDR3 registered DIMM layout and will seat in any compatible DDR3 server memory slot.

Is there a specific order for populating the 2Rx4 registered modules on a Supermicro board?

Supermicro boards typically require registered DIMMs to be installed starting with the slot furthest from the CPU; check the motherboard manual for the exact population sequence.

Will the 1.5V DDR3 modules need any firmware updates or battery changes over time?

No firmware or battery maintenance is required for the memory modules themselves; they operate at the standard 1.5V DDR3 voltage for their service life.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.