NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation
This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.
ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.
The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KTD-PE424D8/16G |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | KTD-PE424D8/16G |
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.
The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.
Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?