NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation
This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.
ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.
The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KTD-PE424D8/16G |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | KTD-PE424D8/16G |
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.
The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.
Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?