NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
A 16GB DDR5 desktop module running at 4800MHz with CL40 latency and 1.1V operation
This A-Tech module is a 16 GB DDR5 DIMM built for desktop systems. It runs at 4800 MT/s with a CL40 latency and the standard 1.1 V voltage. The unbuffered, non-ECC design uses major-brand DRAM ICs and fits a 288-pin slot.
The stick is a direct replacement for the TeamGroup TED516G4800C40BK part number. Swapping in this module restores the original DDR5 4800 specification when the factory kit has failed or when a single slot needs to be filled. The upgrade is worthwhile when the system requires a matched 4800 MT/s module to maintain dual-channel timing.
Builders who need a single 16 GB DDR5 4800 DIMM without a heat spreader will find this module appropriate. Systems that demand ECC, registered buffering, higher speeds or lower latencies should look at other products.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for TeamGroup TED516G4800C40BK |
| Model | A-Tech 16GB DDR5-4800 Desktop RAM Module |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for TeamGroup TED516G4800C40BK |
Yes, the 288-pin DDR5 DIMM fits standard desktop DDR5 slots; check your motherboard manual for supported speeds and maximum capacity per slot.
Power off the PC, open the case, align the notch on the module with the slot key, press firmly until both retention clips click, then enable XMP or the 4800 MHz profile in BIOS — many forget the BIOS step.
No routine maintenance is required; keep the system dust-free for cooling, and replace only if a memory test reports errors or you need more than 16GB capacity.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?