NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 16GB DDR5 desktop module running at 4800MHz with CL40 latency and 1.1V operation
This A-Tech module is a 16 GB DDR5 DIMM built for desktop systems. It runs at 4800 MT/s with a CL40 latency and the standard 1.1 V voltage. The unbuffered, non-ECC design uses major-brand DRAM ICs and fits a 288-pin slot.
The stick is a direct replacement for the TeamGroup TED516G4800C40BK part number. Swapping in this module restores the original DDR5 4800 specification when the factory kit has failed or when a single slot needs to be filled. The upgrade is worthwhile when the system requires a matched 4800 MT/s module to maintain dual-channel timing.
Builders who need a single 16 GB DDR5 4800 DIMM without a heat spreader will find this module appropriate. Systems that demand ECC, registered buffering, higher speeds or lower latencies should look at other products.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for TeamGroup TED516G4800C40BK |
| Model | A-Tech 16GB DDR5-4800 Desktop RAM Module |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for TeamGroup TED516G4800C40BK |
Yes, the 288-pin DDR5 DIMM fits standard desktop DDR5 slots; check your motherboard manual for supported speeds and maximum capacity per slot.
Power off the PC, open the case, align the notch on the module with the slot key, press firmly until both retention clips click, then enable XMP or the 4800 MHz profile in BIOS — many forget the BIOS step.
No routine maintenance is required; keep the system dust-free for cooling, and replace only if a memory test reports errors or you need more than 16GB capacity.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?