BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277761BTC
Raktáron
A-Tech
A-Tech 4GB DDR3 1066MHz PC3-8500 204-Pin SODIMM CL7 1.5V laptop RAM
4GB DDR3 1066MHz SODIMM laptop memory with CL7 latency and 1.5V operation
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1066 (PC3 8500)
- CAS LatencyCL7
- Voltage1.50V
- ECCNo
- Boosts system responsiveness with 4GB DDR3 1066MHz memory
- Fits laptops using 204-pin SODIMM slots
- Runs at standard 1.50V DDR3 voltage
- Low CL7 latency for quicker data access
- Replaces Kingston KTA-MB1066K2/8G and compatible modules
Single 4GB DDR3 1066MHz SODIMM
This A-Tech module provides 4GB of DDR3 memory at 1066MHz (PC3-8500) in a 204-pin SODIMM form factor. It operates at the standard 1.5V with CL7 latency and uses unbuffered, non-ECC chips. The stick is designed as a direct replacement for specific Kingston part numbers in laptop, notebook, and all-in-one systems.
Fits non-ECC DDR3 laptops accepting 1.5V modules
Systems that require ECC, registered memory, a different voltage, or a different pin configuration cannot use this module. Buyers needing more than 4GB per slot or a faster DDR3 speed grade should verify their platform requirements before ordering. The part is validated for AMD and Intel platforms that support this specification.
1066MHz DDR3 speed rating (PC3-8500)
This single specification determines whether the module matches the memory controller in the target machine. If the system requires a different DDR3 frequency, the upgrade will not function correctly. Always confirm the supported speed against the laptop's documentation prior to purchase.
Erősségek
- Boosts system responsiveness with 4GB DDR3 1066MHz memory
- Fits laptops using 204-pin SODIMM slots
- Runs at standard 1.50V DDR3 voltage
- Low CL7 latency for quicker data access
- Replaces Kingston KTA-MB1066K2/8G and compatible modules
Műszaki adatok
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Kérdések a termékről
Does my laptop need a free 204-pin DDR3 SODIMM slot to install this 4GB module?
Yes, it requires one vacant 204-pin DDR3 SO-DIMM socket running at 1.5 V.
If I keep an existing DDR3 stick, will this module run at the same 1066 MHz speed?
The system will operate both modules at the lowest common speed; this stick is rated for 1066 MHz.
How can I confirm the new RAM is detected at 1066 MHz with CL7 timing?
Check the memory tab in CPU-Z or your BIOS — it should show 1066 MHz, PC3-8500 and CL7 latency.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280345BTC
Raktáron
