Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge contacts

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 204-Pin SODIMM CL7 1.5V laptop RAM

SKU CH-6GQE-05NAZ

4GB DDR3 1066MHz SODIMM laptop memory with CL7 latency and 1.5V operation

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR3 1066MHz memory
  • Fits laptops using 204-pin SODIMM slots
  • Runs at standard 1.50V DDR3 voltage
  • Low CL7 latency for quicker data access
  • Replaces Kingston KTA-MB1066K2/8G and compatible modules

Single 4GB DDR3 1066MHz SODIMM

This A-Tech module provides 4GB of DDR3 memory at 1066MHz (PC3-8500) in a 204-pin SODIMM form factor. It operates at the standard 1.5V with CL7 latency and uses unbuffered, non-ECC chips. The stick is designed as a direct replacement for specific Kingston part numbers in laptop, notebook, and all-in-one systems.

Fits non-ECC DDR3 laptops accepting 1.5V modules

Systems that require ECC, registered memory, a different voltage, or a different pin configuration cannot use this module. Buyers needing more than 4GB per slot or a faster DDR3 speed grade should verify their platform requirements before ordering. The part is validated for AMD and Intel platforms that support this specification.

1066MHz DDR3 speed rating (PC3-8500)

This single specification determines whether the module matches the memory controller in the target machine. If the system requires a different DDR3 frequency, the upgrade will not function correctly. Always confirm the supported speed against the laptop's documentation prior to purchase.

Puncte forte

  • Boosts system responsiveness with 4GB DDR3 1066MHz memory
  • Fits laptops using 204-pin SODIMM slots
  • Runs at standard 1.50V DDR3 voltage
  • Low CL7 latency for quicker data access
  • Replaces Kingston KTA-MB1066K2/8G and compatible modules

Specificații

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Întrebări despre acest articol

Does my laptop need a free 204-pin DDR3 SODIMM slot to install this 4GB module?

Yes, it requires one vacant 204-pin DDR3 SO-DIMM socket running at 1.5 V.

If I keep an existing DDR3 stick, will this module run at the same 1066 MHz speed?

The system will operate both modules at the lowest common speed; this stick is rated for 1066 MHz.

How can I confirm the new RAM is detected at 1066 MHz with CL7 timing?

Check the memory tab in CPU-Z or your BIOS — it should show 1066 MHz, PC3-8500 and CL7 latency.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.