NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
64 GB DDR4 2400 ECC load-reduced DIMM with CL17 latency and 4Rx4 organisation for high-density server memory upgrades
This A-Tech module delivers 64GB of DDR4 memory in a single 288-pin LRDIMM package. It operates at 2400MHz with a CAS latency of 17 and runs at the standard 1.2V voltage. The load-reduced design and ECC support target server and workstation platforms that require high-density, error-correcting memory.
The 4Rx4 organisation and load-reduced architecture reduce electrical loading on the memory bus, helping maintain signal integrity when all slots are populated. ECC circuitry detects and corrects single-bit errors during continuous operation, while the major-brand chipset and 1.20V operation keep power draw stable under extended workloads.
Verify that your motherboard supports DDR4 LRDIMM modules and accepts 4Rx4 ranks at the 2400MHz data rate. Confirm the system BIOS recognises 64GB single-module capacity and that the platform’s qualified-vendor list includes this specification. Ensure the DIMM slot keying matches the 288-pin DDR4 form factor before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Each module operates at the standard DDR4 voltage of 1.2V, keeping power draw low for high-density 4Rx4 server configurations.
A DDR4 server platform with a 288-pin DIMM slot and a CPU memory controller that supports Load Reduced ECC memory is required.
Mixing LRDIMMs with standard RDIMMs on the same memory channel is not supported; all slots in a channel must use the same module type.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?