NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
64 GB DDR4 2400 ECC load-reduced DIMM with CL17 latency and 4Rx4 organisation for high-density server memory upgrades
This A-Tech module delivers 64GB of DDR4 memory in a single 288-pin LRDIMM package. It operates at 2400MHz with a CAS latency of 17 and runs at the standard 1.2V voltage. The load-reduced design and ECC support target server and workstation platforms that require high-density, error-correcting memory.
The 4Rx4 organisation and load-reduced architecture reduce electrical loading on the memory bus, helping maintain signal integrity when all slots are populated. ECC circuitry detects and corrects single-bit errors during continuous operation, while the major-brand chipset and 1.20V operation keep power draw stable under extended workloads.
Verify that your motherboard supports DDR4 LRDIMM modules and accepts 4Rx4 ranks at the 2400MHz data rate. Confirm the system BIOS recognises 64GB single-module capacity and that the platform’s qualified-vendor list includes this specification. Ensure the DIMM slot keying matches the 288-pin DDR4 form factor before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Each module operates at the standard DDR4 voltage of 1.2V, keeping power draw low for high-density 4Rx4 server configurations.
A DDR4 server platform with a 288-pin DIMM slot and a CPU memory controller that supports Load Reduced ECC memory is required.
Mixing LRDIMMs with standard RDIMMs on the same memory channel is not supported; all slots in a channel must use the same module type.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?