A-Tech 4GB DDR4 2133MHz UDIMM Non-ECC Unbuffered 1.2V CL15 288-Pin Desktop RAM
- 4GB
- DDR4 2133 (PC4 1700…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
Dual-channel kit supplies 8 GB of DDR4 memory at 2666 MHz with CL19 latency and 1.2 V operation
Capacity 8GB (2 x 4GB)
Speed DDR4 2666 (PC4 21300)
This A-Tech kit provides 8GB of DDR4 memory as two 4GB modules. It is built for desktop PCs that accept standard 288-pin DIMMs running at 2666MHz. The unbuffered, non-ECC design suits everyday computing and multitasking.
Modules slot into the motherboard DIMM sockets like any standard DDR4 DIMM. The most common issue is mixing this kit with existing memory of a different speed or latency, which can prevent the system from posting. Use matched slots for dual-channel operation.
Verify that your motherboard and processor support DDR4 2666MHz unbuffered non-ECC DIMMs at 1.2V. Confirm the board has two free 288-pin slots and that the BIOS is current enough to recognise the modules. Check the vendor’s qualified memory list if one is published.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Yes, the two 288-pin modules install in the appropriate slots for dual-channel operation; check the board manual for the recommended pair.
1.20 V is the standard DDR4 voltage, so any desktop board that accepts DDR4 2666 will run these modules at the correct level.
CL19 indicates 19 clock cycles of CAS latency at 2666 MHz, giving typical desktop latency for everyday multitasking and office workloads.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?