A-Tech 4GB DDR4 2133MHz UDIMM Non-ECC Unbuffered 1.2V CL15 288-Pin Desktop RAM
- 4GB
- DDR4 2133 (PC4 1700…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
Dual-channel kit supplies 8 GB of DDR4 memory at 2666 MHz with CL19 latency and 1.2 V operation
Capacity 8GB (2 x 4GB)
Speed DDR4 2666 (PC4 21300)
This A-Tech kit provides 8GB of DDR4 memory as two 4GB modules. It is built for desktop PCs that accept standard 288-pin DIMMs running at 2666MHz. The unbuffered, non-ECC design suits everyday computing and multitasking.
Modules slot into the motherboard DIMM sockets like any standard DDR4 DIMM. The most common issue is mixing this kit with existing memory of a different speed or latency, which can prevent the system from posting. Use matched slots for dual-channel operation.
Verify that your motherboard and processor support DDR4 2666MHz unbuffered non-ECC DIMMs at 1.2V. Confirm the board has two free 288-pin slots and that the BIOS is current enough to recognise the modules. Check the vendor’s qualified memory list if one is published.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the two 288-pin modules install in the appropriate slots for dual-channel operation; check the board manual for the recommended pair.
1.20 V is the standard DDR4 voltage, so any desktop board that accepts DDR4 2666 will run these modules at the correct level.
CL19 indicates 19 clock cycles of CAS latency at 2666 MHz, giving typical desktop latency for everyday multitasking and office workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?