Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 4GB DDR4 2133MHz UDIMM Non-ECC Unbuffered 1.2V CL15 288-Pin Desktop RAM

SKU CH-3C9D-RFYB4

A 4GB DDR4 desktop module running at 2133MHz with CL15 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Speed DDR4 2133 (PC4 17000)

  • Boosts multitasking with 4 GB DDR4 capacity
  • Runs efficiently at 1.2 V standard voltage
  • Installs easily in 288-pin desktop slots
  • Tested for reliability at 2133 MHz speed
  • Low CL15 latency improves system responsiveness

A-Tech 4GB DDR4 2133MHz UDIMM

This module is a 4GB DDR4 2133MHz UDIMM built for desktop computers. It targets users who need a straightforward memory upgrade to improve multitasking and system responsiveness. The non-ECC unbuffered design suits standard consumer motherboards.

DDR4 2133MHz PC4-17000 speed grade

The decisive specification is the DDR4 2133MHz rating, also labelled PC4-17000, with a tested frequency of 2133 and CAS latency of 15. Your motherboard must support this exact speed and voltage for the module to operate correctly.

1.2V standard voltage and 288-pin form factor

The module runs at the DDR4 standard 1.2V and uses the 288-pin DIMM form factor. These attributes ensure compatibility with DDR4 desktop slots without requiring special cooling or voltage adjustments.

Kohokohdat

  • Boosts multitasking with 4 GB DDR4 capacity
  • Runs efficiently at 1.2 V standard voltage
  • Installs easily in 288-pin desktop slots
  • Tested for reliability at 2133 MHz speed
  • Low CL15 latency improves system responsiveness

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Desktop Memory RAM
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 2133 MHz rating mean once this DDR4 module is installed in my desktop?

The 2133 MHz tested frequency sets the maximum data rate the memory controller will use by default, delivering PC4-17000 bandwidth for everyday desktop workloads.

How does the DDR4 2133 (PC4-17000) interface limit performance in practice?

The DDR4 2133 standard caps the module at 2133 MT/s and PC4-17000 peak throughput, so the system cannot run this stick faster without manual overclocking.

Will the 288-pin DIMM fit my motherboard's memory slots?

Yes, the 288-pin DDR4 DIMM form factor matches standard desktop DDR4 slots; verify your board supports DDR4 before installing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.