NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
8GB DDR3 desktop module running at 1866MHz with CL13 latency and 1.5V operation
This A-Tech module is an 8GB DDR3 desktop DIMM rated at 1866 MHz with CL13 latency and 1.50 V operation. It is built as a direct replacement for several G.Skill kits including the F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR and F3-1866C9D-16GXM. Each stick uses unbuffered non-ECC chips on a 240-pin PCB.
The module fits desktop boards that accept DDR3 1866 MT/s memory at standard voltage. Builders upgrading an existing G.Skill kit or adding a single 8GB stick to a compatible platform will find it matches the required speed and timing. Systems that require ECC, registered DIMMs, a different DDR generation or a lower voltage should use a different part.
The tested frequency of 1866 MHz combined with CAS latency 13 and 1.50 V is the specification that determines whether this DIMM will work in a given motherboard. Verify that the board supports DDR3 1866 at this latency and voltage before ordering.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM |
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| Tested Frequency | 1866 |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM |
| Recommend Use | Compatible Replacement for G.Skill F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM |
This listing is a single 8GB stick rated at CL13. The referenced G.Skill kits come as 16GB dual-channel pairs or 32GB quad-channel sets, so choose based on how many slots you have free and the total capacity your board supports.
The module runs at 1866MHz with CL13 timing at the standard 1.5V DDR3 voltage, giving a PC3-14900 bandwidth rating that the memory controller will use automatically if the BIOS is set to default or XMP profiles.
It uses the 240-pin DDR3 DIMM form factor, so it only fits desktop DDR3 slots; the 262-pin count mentioned in some data refers to SO-DIMM and does not apply to this module.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?