Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green rectangular circuit board with gold edge contacts and black memory chips no heat spreader

A-Tech

A-Tech 8GB DDR3-1866 CL13 desktop RAM

SKU CH-ZBKG-AZH8X

8GB DDR3 desktop module running at 1866MHz with CL13 latency and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • Boosts multitasking with 8GB DDR3 1866MHz capacity
  • Runs at standard 1.5V for broad desktop compatibility
  • Tested at CL13 latency for reliable response
  • Direct replacement for G.Skill F3-1866C10D-16GAB series modules
  • 240-pin DIMM fits standard desktop memory slots

Compatible G.Skill Replacement

This A-Tech module is an 8GB DDR3 desktop DIMM rated at 1866 MHz with CL13 latency and 1.50 V operation. It is built as a direct replacement for several G.Skill kits including the F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR and F3-1866C9D-16GXM. Each stick uses unbuffered non-ECC chips on a 240-pin PCB.

Suits DDR3 Systems Needing 8GB

The module fits desktop boards that accept DDR3 1866 MT/s memory at standard voltage. Builders upgrading an existing G.Skill kit or adding a single 8GB stick to a compatible platform will find it matches the required speed and timing. Systems that require ECC, registered DIMMs, a different DDR generation or a lower voltage should use a different part.

1866 MHz CL13 at 1.50 V Decides Fit

The tested frequency of 1866 MHz combined with CAS latency 13 and 1.50 V is the specification that determines whether this DIMM will work in a given motherboard. Verify that the board supports DDR3 1866 at this latency and voltage before ordering.

Najważniejsze cechy

  • Boosts multitasking with 8GB DDR3 1866MHz capacity
  • Runs at standard 1.5V for broad desktop compatibility
  • Tested at CL13 latency for reliable response
  • Direct replacement for G.Skill F3-1866C10D-16GAB series modules
  • 240-pin DIMM fits standard desktop memory slots

Specyfikacja

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM
Recommend UseCompatible Replacement for G.Skill F3-1866C10D-16GAB, F3-1866C10D-16GSR, F3-1866C10Q-32GSR, F3-1866C9D-16GSR, F3-1866C9D-16GXM

Pytania dotyczące tego produktu

Should I pick the 8GB CL13 module or look for a 16GB or 32GB kit instead?

This listing is a single 8GB stick rated at CL13. The referenced G.Skill kits come as 16GB dual-channel pairs or 32GB quad-channel sets, so choose based on how many slots you have free and the total capacity your board supports.

What does the 1866MHz rating actually deliver once installed?

The module runs at 1866MHz with CL13 timing at the standard 1.5V DDR3 voltage, giving a PC3-14900 bandwidth rating that the memory controller will use automatically if the BIOS is set to default or XMP profiles.

Which interface and pin count does this DDR3 DIMM use, and what does that limit?

It uses the 240-pin DDR3 DIMM form factor, so it only fits desktop DDR3 slots; the 262-pin count mentioned in some data refers to SO-DIMM and does not apply to this module.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.