Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular DDR3L DIMM with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-2PPB-0HA2V

8GB DDR3L 1333MHz ECC registered server DIMM running at 1.35V with 2Rx4 organisation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports demanding server workloads
  • DDR3L 1333MHz speed delivers responsive data throughput
  • ECC registered design detects and corrects memory errors
  • Low 1.35V voltage reduces power draw and heat
  • Direct replacement for listed Micron part numbers

8GB DDR3L ECC RDIMM for Servers

This 8GB registered DIMM is built for servers and workstations that require error-correcting memory. It replaces Micron MT36KSF1G72PZ series modules in compatible platforms. The module is not for desktop boards that only accept unbuffered non-ECC memory.

DDR3L 1333MHz Registered Signal Limits

The DDR3L interface runs at 1333MHz with a 1.35V supply and CL9 latency. Registered buffering adds a clock cycle of address and command delay, so the memory controller must support registered DIMMs. Systems limited to 1.5V DDR3 or unbuffered slots cannot use this module.

2Rx4 Organisation Decides Fit

The 2Rx4 rank configuration determines how the memory controller addresses the chips. A platform qualified for 2Rx4 ECC RDIMMs will recognise the full 8GB capacity; a board limited to 1Rx4 or 2Rx8 organisation may report less memory or fail to boot.

Erősségek

  • 8GB capacity supports demanding server workloads
  • DDR3L 1333MHz speed delivers responsive data throughput
  • ECC registered design detects and corrects memory errors
  • Low 1.35V voltage reduces power draw and heat
  • Direct replacement for listed Micron part numbers

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KSF1G72PZ-1G4D1AD, MT36KSF1G72PZ-1G4K1FE, MT36KSF1G72PZ-1G4K1HE, MT36KSF1G72PZ-1G4M1FE, MT36KSF1G72PZ-1G4M1FF
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36KSF1G72PZ-1G4D1AD, MT36KSF1G72PZ-1G4K1FE, MT36KSF1G72PZ-1G4K1HE, MT36KSF1G72PZ-1G4M1FE, MT36KSF1G72PZ-1G4M1FF

Kérdések a termékről

Should I choose the DDR3L 1333MHz CL9 module or a faster DDR3L speed for my server?

This module runs at 1333MHz with CL9 latency at 1.35V. Installing faster DDR3L memory will downclock to the lowest speed present, so matching 1333MHz avoids mixed-speed operation.

What does the PC3L-10600 rating mean for actual throughput in my system?

PC3L-10600 indicates a peak transfer rate of 10600 MB/s. Real-world bandwidth depends on your server's memory controller, channel configuration and whether you populate one or multiple DIMMs per channel.

Will the 240-pin registered ECC DIMM work in a standard desktop motherboard?

No. The 240-pin RDIMM requires a server or workstation chipset that supports registered ECC memory and the 1.35V DDR3L standard. Desktop boards typically use unbuffered non-ECC DIMMs and will not post with this module.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.