Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular DDR3L DIMM with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-2PPB-0HA2V

8GB DDR3L 1333MHz ECC registered server DIMM running at 1.35V with 2Rx4 organisation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports demanding server workloads
  • DDR3L 1333MHz speed delivers responsive data throughput
  • ECC registered design detects and corrects memory errors
  • Low 1.35V voltage reduces power draw and heat
  • Direct replacement for listed Micron part numbers

8GB DDR3L ECC RDIMM for Servers

This 8GB registered DIMM is built for servers and workstations that require error-correcting memory. It replaces Micron MT36KSF1G72PZ series modules in compatible platforms. The module is not for desktop boards that only accept unbuffered non-ECC memory.

DDR3L 1333MHz Registered Signal Limits

The DDR3L interface runs at 1333MHz with a 1.35V supply and CL9 latency. Registered buffering adds a clock cycle of address and command delay, so the memory controller must support registered DIMMs. Systems limited to 1.5V DDR3 or unbuffered slots cannot use this module.

2Rx4 Organisation Decides Fit

The 2Rx4 rank configuration determines how the memory controller addresses the chips. A platform qualified for 2Rx4 ECC RDIMMs will recognise the full 8GB capacity; a board limited to 1Rx4 or 2Rx8 organisation may report less memory or fail to boot.

Punti di forza

  • 8GB capacity supports demanding server workloads
  • DDR3L 1333MHz speed delivers responsive data throughput
  • ECC registered design detects and corrects memory errors
  • Low 1.35V voltage reduces power draw and heat
  • Direct replacement for listed Micron part numbers

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KSF1G72PZ-1G4D1AD, MT36KSF1G72PZ-1G4K1FE, MT36KSF1G72PZ-1G4K1HE, MT36KSF1G72PZ-1G4M1FE, MT36KSF1G72PZ-1G4M1FF
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36KSF1G72PZ-1G4D1AD, MT36KSF1G72PZ-1G4K1FE, MT36KSF1G72PZ-1G4K1HE, MT36KSF1G72PZ-1G4M1FE, MT36KSF1G72PZ-1G4M1FF

Domande su questo articolo

Should I choose the DDR3L 1333MHz CL9 module or a faster DDR3L speed for my server?

This module runs at 1333MHz with CL9 latency at 1.35V. Installing faster DDR3L memory will downclock to the lowest speed present, so matching 1333MHz avoids mixed-speed operation.

What does the PC3L-10600 rating mean for actual throughput in my system?

PC3L-10600 indicates a peak transfer rate of 10600 MB/s. Real-world bandwidth depends on your server's memory controller, channel configuration and whether you populate one or multiple DIMMs per channel.

Will the 240-pin registered ECC DIMM work in a standard desktop motherboard?

No. The 240-pin RDIMM requires a server or workstation chipset that supports registered ECC memory and the 1.35V DDR3L standard. Desktop boards typically use unbuffered non-ECC DIMMs and will not post with this module.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.