NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
An 8 GB DDR3L 1600 MHz ECC registered DIMM for server and workstation upgrades
This A-Tech module delivers 8 GB of DDR3L 1600 memory in a registered DIMM format designed for server and workstation platforms. It operates at 1.35 V low voltage with CL11 latency and uses Samsung chipset components. The stick is a direct compatible replacement for Samsung M392B1G70DB0-YK0.
The single specification that decides fit is the registered ECC design with 1Rx4 rank configuration on a 240-pin DDR3L interface. Systems requiring unbuffered non-ECC DIMMs or a different rank layout will not accept this module. Verify the motherboard qualification list before purchase.
Installation follows the usual DIMM slot procedure: align the notch, press firmly until the retention clips lock, and confirm seating. The most common issue is mixing registered ECC with unbuffered memory or populating slots in an order the platform firmware does not support, which prevents boot.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1G70DB0-YK0 |
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | M392B1G70DB0-YK0 |
The module runs at DDR3L 1600 MHz with CL11 latency, providing the rated PC3L 12800 data rate when the platform operates at that speed.
Registered ECC adds a clock cycle for buffering and enables single-bit error correction, so the system sees the full 8 GB at up to 1600 MHz if the memory controller supports registered DIMMs.
It uses the standard 240-pin DDR3 DIMM form factor with 1.35 V low-voltage operation; verify your platform accepts DDR3L registered ECC modules before installing.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?