NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
An 8 GB DDR3L 1600 MHz ECC registered DIMM for server and workstation upgrades
This A-Tech module delivers 8 GB of DDR3L 1600 memory in a registered DIMM format designed for server and workstation platforms. It operates at 1.35 V low voltage with CL11 latency and uses Samsung chipset components. The stick is a direct compatible replacement for Samsung M392B1G70DB0-YK0.
The single specification that decides fit is the registered ECC design with 1Rx4 rank configuration on a 240-pin DDR3L interface. Systems requiring unbuffered non-ECC DIMMs or a different rank layout will not accept this module. Verify the motherboard qualification list before purchase.
Installation follows the usual DIMM slot procedure: align the notch, press firmly until the retention clips lock, and confirm seating. The most common issue is mixing registered ECC with unbuffered memory or populating slots in an order the platform firmware does not support, which prevents boot.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1G70DB0-YK0 |
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | M392B1G70DB0-YK0 |
The module runs at DDR3L 1600 MHz with CL11 latency, providing the rated PC3L 12800 data rate when the platform operates at that speed.
Registered ECC adds a clock cycle for buffering and enables single-bit error correction, so the system sees the full 8 GB at up to 1600 MHz if the memory controller supports registered DIMMs.
It uses the standard 240-pin DDR3 DIMM form factor with 1.35 V low-voltage operation; verify your platform accepts DDR3L registered ECC modules before installing.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?