Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 288-pin DDR4 DIMM module with black Micron chips, no heat spreader

A-Tech

A-Tech Supermicro Certified 4GB DDR4 2133MHz CL15 1.2V 288-Pin Desktop RAM

SKU CH-FVVM-KD52C

A 4GB DDR4 2133MHz CL15 unbuffered DIMM for desktop upgrades, validated for Supermicro systems

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 capacity
  • Runs at 2133MHz CL15 for fast data access
  • Operates at 1.2V standard DDR4 voltage
  • 288-pin DIMM fits desktop motherboards
  • Supermicro certified with Micron chipset for reliability

Supermicro Certified DDR4 Module

This 4GB DDR4 module carries Supermicro certification under part number MEM-DR440L-CL01-UN21 and uses Micron chips. It is built for desktop systems that require non-ECC unbuffered memory at the standard 1.2V operating voltage. The single 288-pin DIMM targets users upgrading or repairing compatible Supermicro platforms.

Sustained Load Behaviour

Rated at 2133MHz with CL15 latency, the module maintains its JEDEC standard timing without relying on overclock profiles. Because it runs at the default 1.2V, thermal output stays predictable during extended workloads such as virtualization or compilation tasks. No heat spreader is fitted, so airflow in the chassis determines long-term temperature stability.

Installation Notes

The 288-pin DIMM keys into any standard DDR4 desktop slot; alignment notches prevent backward insertion. Common issues arise when mixing this stick with modules of different rank, speed or voltage, which can prevent the system from posting. Verify the motherboard qualified-vendor list for the exact MEM-DR440L-CL01-UN21 part number before installing.

Erősségek

  • Boosts system responsiveness with 4GB DDR4 capacity
  • Runs at 2133MHz CL15 for fast data access
  • Operates at 1.2V standard DDR4 voltage
  • 288-pin DIMM fits desktop motherboards
  • Supermicro certified with Micron chipset for reliability

Műszaki adatok

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR440L-CL01-UN21
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR440L-CL01-UN21 (Micron)
Recommend UseCompatible Supermicro Systems

Kérdések a termékről

How much heat and power does the 1.20V DDR4 2133MHz module produce when running continuously?

The module operates at the standard 1.20V DDR4 voltage, keeping power draw low during all-day workloads.

What must my motherboard provide for this 288-pin DIMM to function?

A desktop board with a DDR4 DIMM slot that accepts 2133MHz unbuffered non-ECC memory at 1.20V.

Will this CL15 4GB stick work alongside older DDR4 modules I already have installed?

It will run at the lowest common speed and latency; mixing capacities or timings is supported but may limit performance.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.