SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00504076BTC
Krājumā
A-Tech
A-Tech Supermicro Certified 4GB DDR4 2133MHz CL15 1.2V 288-Pin Desktop RAM
A 4GB DDR4 2133MHz CL15 unbuffered DIMM for desktop upgrades, validated for Supermicro systems
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- Boosts system responsiveness with 4GB DDR4 capacity
- Runs at 2133MHz CL15 for fast data access
- Operates at 1.2V standard DDR4 voltage
- 288-pin DIMM fits desktop motherboards
- Supermicro certified with Micron chipset for reliability
Supermicro Certified DDR4 Module
This 4GB DDR4 module carries Supermicro certification under part number MEM-DR440L-CL01-UN21 and uses Micron chips. It is built for desktop systems that require non-ECC unbuffered memory at the standard 1.2V operating voltage. The single 288-pin DIMM targets users upgrading or repairing compatible Supermicro platforms.
Sustained Load Behaviour
Rated at 2133MHz with CL15 latency, the module maintains its JEDEC standard timing without relying on overclock profiles. Because it runs at the default 1.2V, thermal output stays predictable during extended workloads such as virtualization or compilation tasks. No heat spreader is fitted, so airflow in the chassis determines long-term temperature stability.
Installation Notes
The 288-pin DIMM keys into any standard DDR4 desktop slot; alignment notches prevent backward insertion. Common issues arise when mixing this stick with modules of different rank, speed or voltage, which can prevent the system from posting. Verify the motherboard qualified-vendor list for the exact MEM-DR440L-CL01-UN21 part number before installing.
Priekšrocības
- Boosts system responsiveness with 4GB DDR4 capacity
- Runs at 2133MHz CL15 for fast data access
- Operates at 1.2V standard DDR4 voltage
- 288-pin DIMM fits desktop motherboards
- Supermicro certified with Micron chipset for reliability
Specifikācijas
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR440L-CL01-UN21 |
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR440L-CL01-UN21 (Micron) |
| Recommend Use | Compatible Supermicro Systems |
Jautājumi par šo preci
How much heat and power does the 1.20V DDR4 2133MHz module produce when running continuously?
The module operates at the standard 1.20V DDR4 voltage, keeping power draw low during all-day workloads.
What must my motherboard provide for this 288-pin DIMM to function?
A desktop board with a DDR4 DIMM slot that accepts 2133MHz unbuffered non-ECC memory at 1.20V.
Will this CL15 4GB stick work alongside older DDR4 modules I already have installed?
It will run at the lowest common speed and latency; mixing capacities or timings is supported but may limit performance.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
