Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Chrome 90-degree rotatable compression fitting with knurled nuts and G1/4 thread

Alphacool

Alphacool Eiszapfen 90° Rotatable Compression Fitting Chrome 17231

SKU CH-CWBP-G60J6

Connects 3/8" ID x 1/2" OD tubing with a 90° rotatable G1/4 thread in chrome finish

  • TypeFittings

Color Chrome

  • High-flow design supports efficient coolant circulation
  • 90° rotatable elbow enables flexible tube routing
  • Chrome coating resists chipping and peeling over time
  • Slanted nut corners secure O-ring against HardTube
  • Three coloured O-rings included for UV-reactive customisation

Precision 90° Rotatable Fitting Chrome

The Alphacool Eiszapfen 17231 is a 90-degree rotatable compression fitting designed for custom liquid-cooling loops. It accepts tubing with a 10 mm inner diameter and 13 mm outer diameter. A G1/4 thread connects the fitting to standard water-blocks, radiators or reservoirs. The chrome finish uses a bonded coating process that resists chipping and peeling over time.

Ideal for tight tubing routes, not for straight runs

Builders routing hard tubing through confined spaces around graphics cards or motherboard heatsinks will benefit from the 90-degree angle and rotatable collar. The slanted nut corners press the included O-rings firmly against the tube for a secure seal during transport. Buyers needing straight-through connections or variable angles other than 90 degrees should select a different fitting style.

10/13 mm hard-tube compatibility decides fit

This fitting is manufactured specifically for 10 mm ID and 13 mm OD rigid tubing. It will not seal correctly on 13/16 mm, 16/19 mm or any other tube dimension listed in the Eiszapfen range. Verify your tubing specifications match exactly before purchase.

Erősségek

  • High-flow design supports efficient coolant circulation
  • 90° rotatable elbow enables flexible tube routing
  • Chrome coating resists chipping and peeling over time
  • Slanted nut corners secure O-ring against HardTube
  • Three coloured O-rings included for UV-reactive customisation

Műszaki adatok

TypeFittings

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does the 17231 fitting include tubing or do I need to buy 3/8" ID x 1/2" OD hard tube separately?

The box contains one 90° rotatable compression fitting with three coloured O-rings; 13/10 mm or 16/10 mm hard tube must be purchased separately.

Which tubing sizes match the 13, 16 and 19 mm dimensions listed for this 90° rotatable fitting?

The fitting accepts 13/10 mm, 16/10 mm or 19/13 mm hard tube; choose the size that matches your loop's outer and inner diameters.

What does the 95% G1/4 thread compatibility mean when installing the 17231 in a custom loop?

The G1/4 thread fits the vast majority of water blocks, radiators and reservoirs, so the 90° rotatable elbow will screw directly into standard ports.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.