Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black 90-degree rotatable compression fitting with G1/4 thread and matte finish

Alphacool

Alphacool Eiszapfen 90° Rotatable Fitting G1/4 13/10/16/10/19/13mm Black 17230

SKU CH-065A-FGPK1

A 90-degree rotatable G1/4 compression fitting for 10, 13, 16 and 19 mm inner-diameter tubing, finished in durable matte black

  • TypeFittings

Color Black

  • 90° angle simplifies tight hose routing
  • G1/4 thread fits 95% of water-cooling components
  • Rotatable design allows precise alignment after install
  • Durable coating resists chipping and peeling over time
  • Includes three coloured O-rings for custom look

Precision 90° Rotatable Fitting G1/4

This Alphacool Eiszapfen connector joins 3/8-inch inner-diameter, 1/2-inch outer-diameter tubing to any component with a standard G1/4 thread. The 90-degree rotatable elbow lets the hose run cleanly without sharp bends. A durable matte-black coating resists chipping and includes the Alphacool logo for identification. One fitting is supplied in the package.

Suits builders who need a single black 90°

The fitting matches loops that use 13/10, 16/10 or 19/13 millimetre tubing and a G1/4 port. Systems that require straight, angled or multi-port junctions will need different fittings. Installers who prefer chrome finishes or coloured O-ring accents should select the alternative colour options offered in the same series.

G1/4 thread covers 95% of water-cooling components

The quarter-inch thread on the rotating side mates with the vast majority of blocks, radiators, reservoirs and pumps on the market. The opposite end accepts the three listed hose size pairs, so the single specification that decides fit is the G1/4 thread combined with your tubing’s exact inner and outer diameters.

Erősségek

  • 90° angle simplifies tight hose routing
  • G1/4 thread fits 95% of water-cooling components
  • Rotatable design allows precise alignment after install
  • Durable coating resists chipping and peeling over time
  • Includes three coloured O-rings for custom look

Műszaki adatok

TypeFittings

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does the 90° bend restrict flow when the loop runs continuously?

The Eiszapfen series is built for highflow performance, so the 90° rotatable design maintains unrestricted coolant movement even under sustained operation.

How much heat does the black coating add to the fluid during all-day use?

The matte black finish is bonded to the brass body and does not generate additional heat; coolant temperature depends on your radiator and pump, not the fitting itself.

Which tubing sizes must I already have for this G1/4 fitting to connect?

The compression end accepts 13/10 mm, 16/10 mm or 19/13 mm ID/OD tubing, while the threaded side fits any standard G1/4 port.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.