Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 90-degree rotatable compression fitting with G1/4 thread and matte finish

Alphacool

Alphacool Eiszapfen 90° Rotatable Fitting G1/4 13/10/16/10/19/13mm Black 17230

SKU CH-065A-FGPK1

A 90-degree rotatable G1/4 compression fitting for 10, 13, 16 and 19 mm inner-diameter tubing, finished in durable matte black

  • TypeFittings

Color Black

  • 90° angle simplifies tight hose routing
  • G1/4 thread fits 95% of water-cooling components
  • Rotatable design allows precise alignment after install
  • Durable coating resists chipping and peeling over time
  • Includes three coloured O-rings for custom look

Precision 90° Rotatable Fitting G1/4

This Alphacool Eiszapfen connector joins 3/8-inch inner-diameter, 1/2-inch outer-diameter tubing to any component with a standard G1/4 thread. The 90-degree rotatable elbow lets the hose run cleanly without sharp bends. A durable matte-black coating resists chipping and includes the Alphacool logo for identification. One fitting is supplied in the package.

Suits builders who need a single black 90°

The fitting matches loops that use 13/10, 16/10 or 19/13 millimetre tubing and a G1/4 port. Systems that require straight, angled or multi-port junctions will need different fittings. Installers who prefer chrome finishes or coloured O-ring accents should select the alternative colour options offered in the same series.

G1/4 thread covers 95% of water-cooling components

The quarter-inch thread on the rotating side mates with the vast majority of blocks, radiators, reservoirs and pumps on the market. The opposite end accepts the three listed hose size pairs, so the single specification that decides fit is the G1/4 thread combined with your tubing’s exact inner and outer diameters.

Pluspunten

  • 90° angle simplifies tight hose routing
  • G1/4 thread fits 95% of water-cooling components
  • Rotatable design allows precise alignment after install
  • Durable coating resists chipping and peeling over time
  • Includes three coloured O-rings for custom look

Specificaties

TypeFittings

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 90° bend restrict flow when the loop runs continuously?

The Eiszapfen series is built for highflow performance, so the 90° rotatable design maintains unrestricted coolant movement even under sustained operation.

How much heat does the black coating add to the fluid during all-day use?

The matte black finish is bonded to the brass body and does not generate additional heat; coolant temperature depends on your radiator and pump, not the fitting itself.

Which tubing sizes must I already have for this G1/4 fitting to connect?

The compression end accepts 13/10 mm, 16/10 mm or 19/13 mm ID/OD tubing, while the threaded side fits any standard G1/4 port.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.