Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular silver metal chassis with front fan grille and rear exhaust vents, 430 by 195.5 by 290 mm, 15.8 kg

Antminer

Antminer KS5 Pro 21TH/s 3150W kHeavyHash mining hardware

SKU CH-CFS9-AQH1K

Mines Kaspa at 21 TH/s using the kHeavyHash algorithm with 3150 W power draw and 75 dB noise in a 15.8 kg air-cooled chassis

  • 21 TH/s hashrate for Kaspa mining on kHeavyHash
  • 3150 W power draw sets clear energy budget
  • 75 dB noise level suits ventilated rack rooms
  • 8 kg weight fits standard 19-inch shelf rails
  • RJ45 10/100M Ethernet gives simple wired management

Purpose-built KASPA miner

The Antminer KS5 Pro is an application-specific integrated circuit designed to mine the kHeavyHash algorithm used by the KASPA network. It delivers a rated hashrate of 21 TH/s while drawing 3150 W from the wall. The unit targets operators who run dedicated mining infrastructure and need a single-purpose device for that algorithm.

Air-cooled thermal profile

The miner uses forced-air cooling inside a chassis measuring 430 x 195.5 x 290 mm and weighing 15.8 kg. Under normal load the system emits 75 dB of noise, a level typical for high-density rack equipment. Power draw remains steady at the rated 3150 W, so the electrical supply and cooling capacity must match that continuous load.

Ethernet management only

Connectivity is provided by a single RJ45 port operating at 10/100 M, which carries both pool traffic and the web-based management interface. No additional controllers, software licences or wireless modules are included; configuration and monitoring are performed through the built-in dashboard once the unit receives an IP address.

Erősségek

  • 21 TH/s hashrate for Kaspa mining on kHeavyHash
  • 3150 W power draw sets clear energy budget
  • 75 dB noise level suits ventilated rack rooms
  • 8 kg weight fits standard 19-inch shelf rails
  • RJ45 10/100M Ethernet gives simple wired management

Műszaki adatok

Ehhez a termékhez egyelőre nincs közzétett műszaki adat.

Kérdések a termékről

How is the Antminer KS5 Pro installed and what step is commonly missed?

Connect the RJ45 Ethernet 10/100M cable to your router, power the 3150W unit via its PSU cables, then access the web UI to enter your Kaspa pool credentials; the step often skipped is setting a static IP or DHCP reservation so the miner does not lose its address after a reboot.

What maintenance or replacement will the Antminer KS5 Pro need later?

The air-cooling fans and dust filters require periodic cleaning; expect to replace fan assemblies when noise rises above the rated 75 dB or airflow drops enough to raise chip temperatures.

What limit appears first on the Antminer KS5 Pro during sustained operation?

Thermal throttling triggered by the 75 dB cooling system is the first ceiling; if ambient temperature climbs or filters clog, the 21TH/s hashrate will scale back to protect the ASICs.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.