Arduino
Arduino Nano Every ABX00033 development board with headers
Compact 45x18mm board with ATmega4809 microcontroller, 20 digital I/O, 6 analog inputs, 48KB flash and 6KB RAM
- Smallest 5 V board at 45 x 18 mm
- ATMega4809 processor enables larger programs
- 48 KB program memory — 50 % more than Uno
- 6 KB RAM — 200 % increase for more variables
- 20 digital I/O and 6 analog inputs for flexible projects
Compact 5 V microcontroller board
The Arduino Nano Every ABX00033 is a 5 V compatible microcontroller board measuring 45x18 mm. It uses the ATmega4809 processor and comes with headers fitted. The board provides 20 digital I/O pins and 6 analog inputs for connecting sensors and actuators. A Micro USB connector supplies power and programming access.
Suited for space-constrained 5 V projects
This board fits wearable inventions, low-cost robotics and electronic musical instruments where a small footprint matters. It also works well as a subordinate controller in larger projects. Builders needing wireless connectivity, higher voltage I/O or more analog channels should consider other platforms.
48 KB flash and 6 KB RAM
The ATmega4809 provides 48 KB of program memory and 6 KB of RAM, giving 50 % more program space and 200 % more RAM than the classic Arduino Uno. This allows larger programs and more variables for complex sketches.
Erősségek
- Smallest 5 V board at 45 x 18 mm
- ATMega4809 processor enables larger programs
- 48 KB program memory — 50 % more than Uno
- 6 KB RAM — 200 % increase for more variables
- 20 digital I/O and 6 analog inputs for flexible projects
Műszaki adatok
Ehhez a termékhez egyelőre nincs közzétett műszaki adat.
Kérdések a termékről
Does the ATmega4809 on the Nano Every draw much power or run hot when it operates continuously?
The board runs at 5 V with the ATmega4809 microcontroller and has no active cooling; typical current draw stays in the low milliampere range so heat is minimal during all-day use.
What must I already have to start programming the Nano Every with headers?
You need a computer with the Arduino IDE installed and a standard Micro USB cable to connect the board for power and code upload.
Will my existing 5 V shields and Uno libraries work with the Nano Every's ATmega4809?
The Nano Every is 5 V compatible and shares the classic Nano pinout, so most 5 V shields and Uno-sketch libraries run directly on the ATmega4809.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



