暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with pin headers, micro USB port, compact rectangular shape

Arduino

Arduino Nano Every ABX00033 development board with headers

SKU CH-A8CG-Y5TMA

Compact 45x18mm board with ATmega4809 microcontroller, 20 digital I/O, 6 analog inputs, 48KB flash and 6KB RAM

  • Smallest 5 V board at 45 x 18 mm
  • ATMega4809 processor enables larger programs
  • 48 KB program memory — 50 % more than Uno
  • 6 KB RAM — 200 % increase for more variables
  • 20 digital I/O and 6 analog inputs for flexible projects

Compact 5 V microcontroller board

The Arduino Nano Every ABX00033 is a 5 V compatible microcontroller board measuring 45x18 mm. It uses the ATmega4809 processor and comes with headers fitted. The board provides 20 digital I/O pins and 6 analog inputs for connecting sensors and actuators. A Micro USB connector supplies power and programming access.

Suited for space-constrained 5 V projects

This board fits wearable inventions, low-cost robotics and electronic musical instruments where a small footprint matters. It also works well as a subordinate controller in larger projects. Builders needing wireless connectivity, higher voltage I/O or more analog channels should consider other platforms.

48 KB flash and 6 KB RAM

The ATmega4809 provides 48 KB of program memory and 6 KB of RAM, giving 50 % more program space and 200 % more RAM than the classic Arduino Uno. This allows larger programs and more variables for complex sketches.

特長

  • Smallest 5 V board at 45 x 18 mm
  • ATMega4809 processor enables larger programs
  • 48 KB program memory — 50 % more than Uno
  • 6 KB RAM — 200 % increase for more variables
  • 20 digital I/O and 6 analog inputs for flexible projects

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the ATmega4809 on the Nano Every draw much power or run hot when it operates continuously?

The board runs at 5 V with the ATmega4809 microcontroller and has no active cooling; typical current draw stays in the low milliampere range so heat is minimal during all-day use.

What must I already have to start programming the Nano Every with headers?

You need a computer with the Arduino IDE installed and a standard Micro USB cable to connect the board for power and code upload.

Will my existing 5 V shields and Uno libraries work with the Nano Every's ATmega4809?

The Nano Every is 5 V compatible and shares the classic Nano pinout, so most 5 V shields and Uno-sketch libraries run directly on the ATmega4809.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。