be quiet! BL128 LIGHT WINGS LX 140mm PWM ARGB Case Fan Triple Pack
- 3 Fans
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
be quiet!
Triple pack of 140 mm PWM case fans with ARGB illumination, 56.0 CFM airflow, 22.9 dBA noise and 60,000-hour rifle bearing life
Fan Size 140mm
Model LIGHT WINGS LX PWM
Option Triple Pack
The be quiet! LIGHT WINGS LX triple pack supplies three 140mm PWM case fans with addressable RGB lighting. Each unit uses a rifle bearing rated for 60000 hours of operation. The bundle suits builders who want coordinated illumination across multiple intake or exhaust positions. Single-fan buyers should look elsewhere.
The key specification is the airflow-to-noise ratio: 56.0 CFM delivered at a maximum of 22.9 dBA. Seven optimised blades and a 25mm frame generate 0.90 mmH2O static pressure, making these fans effective for both unrestricted and slightly restrictive mounting locations. Systems needing higher static pressure will require different models.
Rifle-bearing construction and a low starting RPM allow the fans to maintain their rated airflow and pressure over long sessions without acoustic degradation. The daisy-chain ARGB cable reduces cable clutter that can impede airflow in tightly packed builds. Users expecting continuously rising speeds under load should note the PWM curve stays within the published limits.
| Brand | be quiet! |
|---|---|
| Series | LIGHT WINGS LX 140mm PWM |
| Model | BL127 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Rifle |
| RPM | 56.0 CFM |
| Air Flow | Variable |
| Air Pressure | 0.90 mmH2O |
| Noise Level | 22.9 dBA |
| Power Connector | 4-pin PWM |
| Color | Black |
| LED | ARGB |
| Dimensions | 140 x 140 x 25mm |
| Szállítási súly | 0.45 kg |
| Csomagméret | 178 × 152 × 76 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The 56.0 CFM figure shows the maximum volume of air each fan can move; actual flow inside your case will be lower due to grille resistance, dust filters and component obstructions.
The 4-pin PWM connector lets the motherboard vary fan speed precisely; the practical limit is the fan's own top speed and the motherboard's PWM duty-cycle range.
Each fan measures 140mm square and 25mm thick, matching the standard 140mm mounting pattern; verify your case has 140mm holes and at least 25mm depth between the frame and any components.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?