be quiet! BL123 LIGHT WINGS LX 120mm 2100 RPM ARGB case fan
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
be quiet!
Triple pack of 140 mm PWM case fans with ARGB illumination, 56.0 CFM airflow, 22.9 dBA noise and 60,000-hour rifle bearing life
Fan Size 140mm
Model LIGHT WINGS LX PWM
Option Triple Pack
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The be quiet! LIGHT WINGS LX triple pack supplies three 140mm PWM case fans with addressable RGB lighting. Each unit uses a rifle bearing rated for 60000 hours of operation. The bundle suits builders who want coordinated illumination across multiple intake or exhaust positions. Single-fan buyers should look elsewhere.
The key specification is the airflow-to-noise ratio: 56.0 CFM delivered at a maximum of 22.9 dBA. Seven optimised blades and a 25mm frame generate 0.90 mmH2O static pressure, making these fans effective for both unrestricted and slightly restrictive mounting locations. Systems needing higher static pressure will require different models.
Rifle-bearing construction and a low starting RPM allow the fans to maintain their rated airflow and pressure over long sessions without acoustic degradation. The daisy-chain ARGB cable reduces cable clutter that can impede airflow in tightly packed builds. Users expecting continuously rising speeds under load should note the PWM curve stays within the published limits.
| Brand | be quiet! |
|---|---|
| Series | LIGHT WINGS LX 140mm PWM |
| Model | BL127 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Rifle |
| RPM | 56.0 CFM |
| Air Flow | Variable |
| Air Pressure | 0.90 mmH2O |
| Noise Level | 22.9 dBA |
| Power Connector | 4-pin PWM |
| Color | Black |
| LED | ARGB |
| Dimensions | 140 x 140 x 25mm |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 178 × 152 × 76 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 56.0 CFM figure shows the maximum volume of air each fan can move; actual flow inside your case will be lower due to grille resistance, dust filters and component obstructions.
The 4-pin PWM connector lets the motherboard vary fan speed precisely; the practical limit is the fan's own top speed and the motherboard's PWM duty-cycle range.
Each fan measures 140mm square and 25mm thick, matching the standard 140mm mounting pattern; verify your case has 140mm holes and at least 25mm depth between the frame and any components.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?