NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Brute Networks
32 GB DDR4 registered ECC module running at 2400 MHz with 1.2 V operation for compatible Cisco servers
This 32GB DDR4 2400 RDIMM brings ECC registered operation to compatible server platforms. The 2Rx4 organisation and 1.20V voltage match the PC4-19200 specification for stable enterprise workloads. It is built for administrators who need to expand memory capacity in qualified systems. Builders without ECC registered memory support cannot use this module.
The 288-pin registered DIMM plugs directly into DDR4 RDIMM slots that accept 2Rx4 modules at 1.20V. Registered buffering reduces electrical load on the memory controller, freeing the CPU to address larger total capacities across multiple slots. Systems that require unbuffered UDIMMs or a different rank configuration will not accept this part.
A single 32GB module lets a supported platform reach higher installed memory without consuming extra slots, helping to eliminate swapping and paging in virtualised environments. The PC4-19200 speed rating delivers 2400 MT/s bandwidth for typical server applications. Workloads that demand faster DDR4 speeds or higher per-module densities will exceed this module's limits.
| Brand | Cisco |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Each module is a 2Rx4 dual-rank design; most server platforms allow two dual-rank RDIMMs per channel at DDR4-2400, but the exact per-channel limit depends on the specific motherboard and CPU memory controller.
At 1.20 V the module draws only a few watts under load; registered buffering shifts electrical load off the CPU memory controller, so total system heat rise stays modest even with all slots filled.
The board needs DDR4 RDIMM slots, registered ECC support in the BIOS, and a memory controller qualified for PC4-19200 speeds.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?