Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P14637?001 64GB DDR4-2933 4Rx4 Load Reduced server RAM

SKU CH-9C3J-TSN5R

64GB DDR4-2933 load-reduced ECC server memory with 4Rx4 organisation and 1.20V operation

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high bandwidth for data processing
  • Load Reduced 4Rx4 design enables dense memory configurations
  • 2V operation reduces power consumption per module
  • HPE-compatible part P14637?001 integrates with existing infrastructure

HPE-compatible 64 GB DDR4-2933 LRDIMM

This 64 GB DDR4-2933 Load Reduced DIMM is built for HPE servers that need high-density memory. It targets IT teams expanding capacity in existing infrastructure without replacing the platform. The module uses major-brand DRAM and matches the OEM part number for direct substitution.

288-pin installation and validation

The 288-pin DDR4 form factor fits standard server DIMM slots and requires no special tools. Each module is 100% tested and validated for compatibility before shipment. Orders are filled with identically matched sticks to prevent mixed-rank or mixed-vendor issues that can cause boot failures.

Sustained load behaviour at 1.2 V

Load Reduced buffering reduces electrical load on the memory bus, allowing full-capacity population at 2933 MT/s. The 1.20 V operating voltage keeps power draw predictable during continuous workloads. ECC protection corrects single-bit errors in real time to maintain data integrity over long runs.

Erősségek

  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high bandwidth for data processing
  • Load Reduced 4Rx4 design enables dense memory configurations
  • 2V operation reduces power consumption per module
  • HPE-compatible part P14637?001 integrates with existing infrastructure

Műszaki adatok

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Kérdések a termékről

How can I verify the 64GB DDR4-2933 module is recognised at the correct speed after installation?

Enter the server BIOS or UEFI and confirm the memory shows 64GB capacity, 2933 MT/s data rate, 1.20V voltage and 4Rx4 load-reduced ECC configuration.

What ships with the P14637?001 module and is anything else required to install it?

The box contains the single 288-pin DDR4 SDRAM DIMM; no extra cables, brackets or software are needed — just an available DDR4 slot on a compatible HPE server.

Which capacity and rank version should I choose for a server that needs maximum density per slot?

This 64GB 4Rx4 load-reduced DIMM provides the highest density available in this form factor; select it when the platform supports quad-rank LR-DIMMs and 64GB per slot is required.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.