Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P14637?001 64GB DDR4-2933 4Rx4 Load Reduced server RAM

SKU CH-9C3J-TSN5R

64GB DDR4-2933 load-reduced ECC server memory with 4Rx4 organisation and 1.20V operation

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high bandwidth for data processing
  • Load Reduced 4Rx4 design enables dense memory configurations
  • 2V operation reduces power consumption per module
  • HPE-compatible part P14637?001 integrates with existing infrastructure

HPE-compatible 64 GB DDR4-2933 LRDIMM

This 64 GB DDR4-2933 Load Reduced DIMM is built for HPE servers that need high-density memory. It targets IT teams expanding capacity in existing infrastructure without replacing the platform. The module uses major-brand DRAM and matches the OEM part number for direct substitution.

288-pin installation and validation

The 288-pin DDR4 form factor fits standard server DIMM slots and requires no special tools. Each module is 100% tested and validated for compatibility before shipment. Orders are filled with identically matched sticks to prevent mixed-rank or mixed-vendor issues that can cause boot failures.

Sustained load behaviour at 1.2 V

Load Reduced buffering reduces electrical load on the memory bus, allowing full-capacity population at 2933 MT/s. The 1.20 V operating voltage keeps power draw predictable during continuous workloads. ECC protection corrects single-bit errors in real time to maintain data integrity over long runs.

Kohokohdat

  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers high bandwidth for data processing
  • Load Reduced 4Rx4 design enables dense memory configurations
  • 2V operation reduces power consumption per module
  • HPE-compatible part P14637?001 integrates with existing infrastructure

Tekniset tiedot

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

How can I verify the 64GB DDR4-2933 module is recognised at the correct speed after installation?

Enter the server BIOS or UEFI and confirm the memory shows 64GB capacity, 2933 MT/s data rate, 1.20V voltage and 4Rx4 load-reduced ECC configuration.

What ships with the P14637?001 module and is anything else required to install it?

The box contains the single 288-pin DDR4 SDRAM DIMM; no extra cables, brackets or software are needed — just an available DDR4 slot on a compatible HPE server.

Which capacity and rank version should I choose for a server that needs maximum density per slot?

This 64GB 4Rx4 load-reduced DIMM provides the highest density available in this form factor; select it when the platform supports quad-rank LR-DIMMs and 64GB per slot is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.