Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green 204-pin DDR3 SO-DIMM sticks in anti-static tray

Computer Memory Solutions

Computer Memory Solutions 8GB (2 x 4GB) DDR3 1333 CL7 SODIMM Kit

SKU CH-GQZR-MHDSX

An 8 GB dual-channel DDR3 kit with two 4 GB SO-DIMMs running at 1333 MHz and CL7 latency for compatible HP Omni all-in-one systems

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB total capacity for responsive multitasking with two 4GB modules
  • CL7 latency at DDR3 1333MHz for faster data access
  • 5V unbuffered non-ECC design matches system requirements
  • 204-pin SODIMM form factor fits HP Omni 120-1105Z and 120-2010A
  • Lifetime warranty from Computer Memory Solutions guarantees compatibility

Targeted DDR3 Upgrade

This 8 GB kit uses two 4 GB DDR3 1333 CL7 SO-DIMM modules built for the HP Omni 120-1105Z and 120-2010A all-in-one desktops. It is designed for owners of those specific systems who need to reach the maximum supported memory capacity on a 64-bit operating system. The unbuffered non-ECC design matches the platform requirements exactly.

Plug-In Module Design

Each stick is a standard 204-pin SO-DIMM without a heat spreader, allowing it to fit the tight internal slots of the target Omni models. The 1.5 V operating voltage and 7-7-7 timing align with the system's DDR3 1333 specification. Installation is a direct replacement for the factory memory, requiring no configuration changes in the BIOS.

Maximum Capacity Step

The kit raises a compatible 64-bit system from a lower factory amount to the full 8 GB limit the chipset accepts. It replaces slower PC3-8500 modules with faster PC3-10600 parts where applicable. The upgrade is worthwhile when the current installation is below 8 GB and the OS can address the additional space. It does not suit 32-bit environments limited to 4 GB or systems requiring ECC or registered memory.

Erősségek

  • 8GB total capacity for responsive multitasking with two 4GB modules
  • CL7 latency at DDR3 1333MHz for faster data access
  • 5V unbuffered non-ECC design matches system requirements
  • 204-pin SODIMM form factor fits HP Omni 120-1105Z and 120-2010A
  • Lifetime warranty from Computer Memory Solutions guarantees compatibility

Műszaki adatok

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Omni Omni 120-1105Z, 120-2010A
Package Content2 Memory RAM Sticks

Kérdések a termékről

What maximum speed does the PC3-10600 DDR3 SO-DIMM interface support on this kit?

The PC3-10600 rating corresponds to DDR3 1333 MHz, which is the top speed these modules are specified for.

Will the 204-pin SO-DIMM modules fit the 200-pin slots listed for the HP Omni 120-1105Z and 120-2010A?

The modules are 204-pin DDR3 SO-DIMMs, the standard for DDR3 laptop memory, and they install in the two SO-DIMM sockets on those systems.

How are the two 4 GB sticks installed, and what common mistake should be avoided?

Power off the all-in-one, open the memory door, insert each stick at an angle until the gold contacts disappear, then press down until the side clips click; the mistake is stopping before the clips lock.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.