Computer Memory Solutions
Computer Memory Solutions 8GB (2 x 4GB) DDR3 1333 CL7 SODIMM Kit
An 8 GB dual-channel DDR3 kit with two 4 GB SO-DIMMs running at 1333 MHz and CL7 latency for compatible HP Omni all-in-one systems
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 8GB total capacity for responsive multitasking with two 4GB modules
- CL7 latency at DDR3 1333MHz for faster data access
- 5V unbuffered non-ECC design matches system requirements
- 204-pin SODIMM form factor fits HP Omni 120-1105Z and 120-2010A
- Lifetime warranty from Computer Memory Solutions guarantees compatibility
Targeted DDR3 Upgrade
This 8 GB kit uses two 4 GB DDR3 1333 CL7 SO-DIMM modules built for the HP Omni 120-1105Z and 120-2010A all-in-one desktops. It is designed for owners of those specific systems who need to reach the maximum supported memory capacity on a 64-bit operating system. The unbuffered non-ECC design matches the platform requirements exactly.
Plug-In Module Design
Each stick is a standard 204-pin SO-DIMM without a heat spreader, allowing it to fit the tight internal slots of the target Omni models. The 1.5 V operating voltage and 7-7-7 timing align with the system's DDR3 1333 specification. Installation is a direct replacement for the factory memory, requiring no configuration changes in the BIOS.
Maximum Capacity Step
The kit raises a compatible 64-bit system from a lower factory amount to the full 8 GB limit the chipset accepts. It replaces slower PC3-8500 modules with faster PC3-10600 parts where applicable. The upgrade is worthwhile when the current installation is below 8 GB and the OS can address the additional space. It does not suit 32-bit environments limited to 4 GB or systems requiring ECC or registered memory.
Punti di forza
- 8GB total capacity for responsive multitasking with two 4GB modules
- CL7 latency at DDR3 1333MHz for faster data access
- 5V unbuffered non-ECC design matches system requirements
- 204-pin SODIMM form factor fits HP Omni 120-1105Z and 120-2010A
- Lifetime warranty from Computer Memory Solutions guarantees compatibility
Caratteristiche tecniche
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Omni Omni 120-1105Z, 120-2010A |
| Package Content | 2 Memory RAM Sticks |
Domande su questo articolo
What maximum speed does the PC3-10600 DDR3 SO-DIMM interface support on this kit?
The PC3-10600 rating corresponds to DDR3 1333 MHz, which is the top speed these modules are specified for.
Will the 204-pin SO-DIMM modules fit the 200-pin slots listed for the HP Omni 120-1105Z and 120-2010A?
The modules are 204-pin DDR3 SO-DIMMs, the standard for DDR3 laptop memory, and they install in the two SO-DIMM sockets on those systems.
How are the two 4 GB sticks installed, and what common mistake should be avoided?
Power off the all-in-one, open the memory door, insert each stick at an angle until the gold contacts disappear, then press down until the side clips click; the mistake is stopping before the clips lock.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.0013319BTC
Disponibile
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010136BTC
Disponibile