Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 2.5 inch SAS hard drive bare unit no tray

DELL

DELL 401-AASR 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-D31D-AVHKC

A 1.8TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-performance storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed enables rapid data access
  • 12Gb/s SAS interface delivers high throughput
  • 5-inch form factor fits dense server bays
  • Dell 401-AASR part number ensures system compatibility

Dell 401-AASR 1.8TB SAS Drive

The Dell 401-AASR is a 1.8TB internal hard drive built for desktop and server bays that accept a 2.5 inch SAS interface. It spins at 10000 RPM and carries the original manufacturer part number 401-AASR. The drive ships as a bare unit without a tray or caddy. It is suited for arrays that need high-speed rotational storage.

Who This Suits and Who It Does Not

This drive fits systems with a 12Gb/s SAS backplane that can address a 1.8TB capacity in a 2.5 inch form factor. It is not for buyers who need a larger capacity than 1.8TB or a 3.5 inch form factor. It is not for platforms that require a drive supplied with a mounting tray.

Deciding Specification

The interface is SAS with a 12Gb/s transfer rate and the spindle runs at 10000 RPM. These figures determine whether the drive matches the controller and performance tier required by the target array.

Erősségek

  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed enables rapid data access
  • 12Gb/s SAS interface delivers high throughput
  • 5-inch form factor fits dense server bays
  • Dell 401-AASR part number ensures system compatibility

Műszaki adatok

BrandDell
Model401-AASR
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Kérdések a termékről

Which SAS controller or HBA with a 12 Gb/s port do I need to connect the 401-AASR drive?

The drive uses a SAS interface rated for 12 Gb/s transfer, so a controller or backplane that supports SAS at that speed is required for full performance.

Will the 2.5 inch 10K RPM drive fit and spin up in a 3.5 inch bay using an adapter bracket?

A 2.5 to 3.5 inch adapter bracket lets the drive mount securely; the SAS power and data connectors are identical, so the drive will operate normally.

How can I verify the 1.8 TB capacity and 10000 RPM speed are recognised after installation?

Check the BIOS or RAID utility — it should list the model 401-AASR with 1.8 TB capacity and report the spindle speed as 10000 RPM.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.