Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

DELL

DELL 401-AASR 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-D31D-AVHKC

A 1.8TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-performance storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed enables rapid data access
  • 12Gb/s SAS interface delivers high throughput
  • 5-inch form factor fits dense server bays
  • Dell 401-AASR part number ensures system compatibility

Dell 401-AASR 1.8TB SAS Drive

The Dell 401-AASR is a 1.8TB internal hard drive built for desktop and server bays that accept a 2.5 inch SAS interface. It spins at 10000 RPM and carries the original manufacturer part number 401-AASR. The drive ships as a bare unit without a tray or caddy. It is suited for arrays that need high-speed rotational storage.

Who This Suits and Who It Does Not

This drive fits systems with a 12Gb/s SAS backplane that can address a 1.8TB capacity in a 2.5 inch form factor. It is not for buyers who need a larger capacity than 1.8TB or a 3.5 inch form factor. It is not for platforms that require a drive supplied with a mounting tray.

Deciding Specification

The interface is SAS with a 12Gb/s transfer rate and the spindle runs at 10000 RPM. These figures determine whether the drive matches the controller and performance tier required by the target array.

Fordele

  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed enables rapid data access
  • 12Gb/s SAS interface delivers high throughput
  • 5-inch form factor fits dense server bays
  • Dell 401-AASR part number ensures system compatibility

Specifikationer

BrandDell
Model401-AASR
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Spørgsmål om denne vare

Which SAS controller or HBA with a 12 Gb/s port do I need to connect the 401-AASR drive?

The drive uses a SAS interface rated for 12 Gb/s transfer, so a controller or backplane that supports SAS at that speed is required for full performance.

Will the 2.5 inch 10K RPM drive fit and spin up in a 3.5 inch bay using an adapter bracket?

A 2.5 to 3.5 inch adapter bracket lets the drive mount securely; the SAS power and data connectors are identical, so the drive will operate normally.

How can I verify the 1.8 TB capacity and 10000 RPM speed are recognised after installation?

Check the BIOS or RAID utility — it should list the model 401-AASR with 1.8 TB capacity and report the spindle speed as 10000 RPM.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.